Quick Answer: A Soxhlet extraction apparatus is a glass assembly of a boiling flask, an extractor body holding a thimble of solid sample, and a reflux condenser. Freshly condensed solvent repeatedly soaks the sample and siphons back to the flask, extracting fats, oils and other soluble compounds continuously.
The Siphon Cycle
Franz von Soxhlet described the extractor in 1879 for measuring fat in milk, and the design is still standard. Solvent boils in the flask, and its vapour rises through a side tube into the top of the extractor and on into the condenser. The condensed solvent drips onto a thimble of porous paper or cellulose holding the ground sample, gradually filling the chamber around it.
When the liquid reaches the top of the siphon tube, the whole chamber empties back into the flask in one rush, carrying the dissolved material with it, and the cycle repeats. Because the extracted compounds do not evaporate, they accumulate in the flask while the sample is always washed with freshly distilled solvent. That makes the method far more efficient than soaking the sample once in the same volume of solvent.
The Allihn condenser for Soxhlet apparatus is available separately, and the solvent can be reclaimed afterwards with a recovery assembly.
Care & Handling
- Grind the sample and dry it first, as water slows extraction with non-polar solvents.
- Fill the thimble below the top of the siphon tube and plug it with a little cotton or glass wool so particles are not carried into the flask.
- Charge the flask with enough solvent for one full siphon plus a reserve, so it never boils dry during a cycle.
- Clamp the flask and the condenser separately and support the tall assembly firmly on its stand.
Applications
- Determination of crude fat in foods, oilseeds and animal feeds with petroleum ether or hexane
- Extracting oil from groundnuts, soybeans or mustard seed in food science practicals
- Isolating natural products for pharmacognosy and organic chemistry projects
- Extracting additives or residues from soils and polymers in environmental and materials analysis
Specifications
| Principle | Continuous solid-liquid extraction with recycled, freshly distilled solvent |
| Main parts | Round-bottom flask, extractor with siphon and vapour tube, reflux condenser |
| Sample holder | Porous thimble, usually cellulose |
| Heating | Heating mantle or water bath |
Why Choose LabEquip
Food testing, oilseed and agricultural laboratories run Soxhlet extractions every day, and colleges need sets that students can assemble themselves. LabEquip supplies the Soxhlet extraction apparatus with its chemistry lab equipment; give the extractor capacity and quantity through the contact page.
Related Products
- Condenser for Soxhlet Apparatus, Allihn: An Allihn bulb condenser made to fit on top of the Soxhlet extractor.
- Recovery Assembly: A recovery assembly for distilling the solvent off the extract and collecting it for reuse.
- Laboratory Fume Cupboard with Extraction Fan: A ducted fume cupboard with extraction fan for running solvent extractions safely.
- Flask, Boiling, Round Bottom: A round bottom boiling flask for holding the solvent and collecting the extract.
Frequently Asked Questions
Why is Soxhlet extraction more effective than soaking the sample once?
In a Soxhlet extraction apparatus the sample is washed again and again with freshly distilled solvent. The extracted compounds stay behind in the boiling flask, so each cycle meets clean solvent and pulls out more, which removes far more than a single soak in the same volume.
How long does a Soxhlet extraction take?
Usually several hours, made up of many fill-and-siphon cycles. The time depends on the sample, the solvent and how finely the sample is ground; methods usually state a number of hours or cycles to give complete extraction.
What is the thimble in a Soxhlet extractor made of?
The thimble is a porous cup, usually of thick cellulose paper and sometimes of glass fibre, that holds the ground sample. Solvent passes through it while the solid stays inside, so no sample is carried down the siphon.
Why is my Soxhlet extractor not siphoning?
The chamber must fill to the top of the siphon tube before it empties. Too little solvent in the flask, heating too gently, a leak at a joint letting vapour escape, or a thimble that rises above the siphon level can all stop it. Check the joints and solvent level first.
How is fat content calculated from a Soxhlet extraction?
Weigh the dry flask before use, extract, then evaporate the solvent and dry and weigh the flask again. The gain in mass is the extracted fat; divided by the mass of sample and multiplied by 100, it gives the fat percentage.
Can a Soxhlet extraction be left running unattended?
It should be watched. The solvents used are usually flammable, so heating is done with a heating mantle or water bath, never a flame, in a fume cupboard with steady condenser water. A cooling water failure can release solvent vapour quickly.
Last Updated: November 2026










Reviews
There are no reviews yet.