Search

In Stock

Analytical Funnel, Plastic

Anti-Suction Internal Ribbing: Molded with integrated vertical ribs to prevent the formation of airlocks, facilitating rapid filtration by eliminating the vacuum seal between the filter paper and the funnel surface.

Medical-Grade Polypropylene Composition: Fabricated from high-purity, translucent polypropylene (PP) that provides excellent resistance to aggressive acids and solvents while remaining fully autoclavable at 121°C.

₹340.00

Quick Answer: A plastic analytical funnel is a filter funnel moulded in plastic for gravity filtration through folded paper, normally with the standard 60 degree cone and a stem shaped for a steady flow. It is used to filter solutions and precipitates in teaching and routine laboratories where glass breakage is a concern.

What Makes a Funnel Analytical

The term analytical funnel is used for filter funnels made to give quick, clean gravity filtration in quantitative work. A 60 degree cone matches a filter paper folded into quarters, so the paper lies flat against the wall. Many plastic analytical funnels also have ribs on the inside of the cone or along the stem, which leave small channels between paper and wall so air escapes and the filtrate runs faster; whether this listing has ribs is not stated.

Plastic funnels of this kind are usually moulded in polypropylene, which is light, does not shatter and resists most aqueous acids, alkalis and salt solutions at room temperature. It is less suitable for hot concentrated oxidising acids and for some organic solvents that soften or swell it. Polypropylene is also generally autoclavable. The listing does not name the plastic, so check the material before using the funnel with hot liquids or solvents.

For pouring into narrow-necked vessels rather than filtering, the long stem plastic funnel is the better match. Where heat or organic solvents are involved, a glass plain 60 degree funnel is the alternative.

Specifications

Item Filter funnel for gravity filtration with folded paper
Material Plastic, per the listing title; polypropylene is typical
Cone Normally the standard 60 degree angle for folded filter paper
Advantages Light and shatterproof

Applications

  • Gravity filtration of chalk suspensions or the blue copper(II) hydroxide precipitate in school practicals
  • Filtering soil extracts and water samples before colour tests in environmental work
  • Removing excess copper(II) oxide before crystallising copper(II) sulfate in salt preparations
  • General filtration in rooms where glass funnels are frequently broken

Care & Handling

  • Fold the paper into quarters, open it into a cone and wet it with the solvent so it seals against the funnel wall.
  • Keep the liquid level below the top edge of the paper so the mixture cannot bypass it.
  • Wash with warm water and detergent using a soft brush; scratches from abrasive pads hold residues.
  • Keep plastic funnels away from direct flames and hot plates.

Why Choose LabEquip

Schools and routine testing labs that do a lot of gravity filtration choose a plastic analytical funnel to cut breakage without slowing filtration. These funnels are listed in LabEquip’s chemistry lab equipment; send the diameters needed through the contact page.

Related Products

Frequently Asked Questions

What is an analytical funnel used for?

An analytical funnel is a filter funnel for gravity filtration through folded paper, used to separate precipitates and suspended solids from solutions. This one is moulded in plastic, which is light and shatterproof, suiting teaching and routine labs where glass breakage is a concern.

Why do filter funnels have a 60 degree cone?

A circle of filter paper folded in half and then in half again opens into a cone of 60 degrees. A funnel with the same angle lets the paper lie flat against the wall, so liquid flows through the paper evenly instead of channelling around it.

How do you fold filter paper for a filter funnel?

Fold the circle in half, then into quarters, open it so one side has three layers and the other one, and tear a small corner off the outer fold so the paper seals against the funnel. Wet it with a little solvent and press it gently to the wall.

Why should the funnel stem touch the side of the receiving beaker?

With the stem tip against the inner wall, the filtrate runs down the glass without splashing, and the continuous stream helps draw liquid through the stem, which speeds filtration. It also stops drops falling from a height and spraying.

Which liquids can be filtered through a plastic funnel?

Polypropylene, the plastic typically used, resists most aqueous acids, alkalis and salt solutions at room temperature. Avoid hot organic solvents and strong oxidising acids, which can soften or attack it, and use a glass funnel for those.

When should a plastic funnel be used instead of a glass funnel?

Plastic suits classes with younger students, field work and routine aqueous filtrations where breakage is the main risk. Glass is better for hot filtrations, organic solvents and work that needs drying the funnel in an oven.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)