Search

In Stock

Funnel, Plain 60 Degrees (Clear Glass)

Optimal 60-Degree Geometry: Specifically molded to provide an exact internal angle, ensuring maximum surface contact with filter media to accelerate gravitational filtration rates and eliminate bypass.

High-Clarity Borosilicate 3.3 Composition: Fabricated from low-expansion glass that offers exceptional hydrolytic resistance, preventing ion leaching during the transfer of aggressive acidic or alkaline reagents.

₹235.00

Quick Answer: A plain 60 degree glass funnel is a clear glass cone with a smooth inner wall and a stem, whose 60 degree angle matches a circle of filter paper folded into quarters. It is used for gravity filtration and for pouring liquids into narrow-necked vessels.

Why 60 Degrees Suits Filter Paper

When a circle of filter paper is folded in half and then in half again, and opened out with three layers on one side and one on the other, it forms a cone with a 60 degree angle. The funnel shares exactly that angle, so the paper cone lies against the glass all the way round. That close fit lets the wetted paper seal against the wall, so liquid passes through the paper rather than around it.

Plain means the inner wall is smooth, not ribbed or fluted. Ribbed funnels leave air channels that speed filtration; a plain one gives a snug seal with a folded paper cone and is the standard pattern for school filtration, such as separating sand from salt solution or collecting a precipitate. The title does not state stem length or top diameter; the same cone is also listed as a long stem funnel for faster filtration of cool liquids, and as a short stem version for hot solutions.

The clear glass named in the title lets students see the level in the cone and any solid creeping over the paper. Its composition is not stated, so avoid pouring boiling liquids through it until the glass type has been confirmed.

Specifications

Cone angle 60 degrees, to match quarter-folded filter paper
Inner wall Plain (smooth), not ribbed
Material Clear glass, as named in the title
Use Gravity filtration and pouring into narrow openings

Applications

  • Separating sand from salt solution in the classic separation of mixtures practical
  • Collecting precipitates such as calcium carbonate or copper(II) hydroxide for observation
  • Filling burettes, reagent bottles and narrow-necked flasks without spills
  • Holding a paper cone to filter a soil suspension in environmental science lessons

Care & Handling

  • Support the funnel in a filter stand or ring rather than wedging it in a flask neck, which traps air and slows filtration.
  • Take the funnel out of a burette after filling, so drops from the stem do not change the reading.
  • Pour down a glass rod held against the paper, keeping the liquid below the paper’s rim.
  • Wash with warm detergent and a soft brush, and never scrape the cone with metal spatulas.

Why Choose LabEquip

Every school chemistry room uses plain funnels for filtration practicals, and teachers usually order them together with filter paper and stands. The funnel is catalogued under LabEquip’s chemistry lab equipment; tell us the sizes and numbers for your class sets via the contact page.

Related Products

Frequently Asked Questions

How do you fold filter paper to fit a 60 degree funnel?

Fold the circle in half, then in half again, and open it into a cone with three layers on one side and one on the other. That cone has the same 60 degree angle as the funnel, so it lies against the glass all round. Wet it with a little solvent and press it down so it seals.

What does plain mean on a laboratory filter funnel?

Plain means the inner wall is smooth, not ribbed or fluted. A smooth cone gives a snug seal with a folded paper, so liquid passes through the paper rather than around it. Ribbed funnels leave air channels that speed flow, but the plain pattern is the standard for school gravity filtration.

Why is my gravity filtration so slow?

Common causes are a filter paper that is not sealed to the glass, so air breaks the liquid column in the stem, a fine precipitate clogging the paper, or a funnel filled above the paper edge. Let the solid settle first and pour the clear liquid through before the sludge, and keep the liquid level below the paper rim.

What size filter paper fits a 60 degree glass funnel?

Choose a paper circle whose diameter is roughly twice the funnel’s top diameter. When folded into a cone, the paper then sits a little below the rim, which stops liquid running over the paper edge and down the outside of the cone into the filtrate.

Is a glass filter funnel better than a plastic one?

Glass resists organic solvents and hot liquids, can be cleaned thoroughly and shows any residue on its wall. Plastic funnels are lighter and do not shatter, which suits younger students, but some solvents soften them and they should not take hot liquids. For general chemistry, the clear glass funnel is the more versatile.

Can a clear glass funnel be used for hot solutions?

Warm, not boiling-hot, solutions are usually fine if the funnel is warmed first, because clear glass that is not borosilicate can crack with a sudden temperature change. For hot filtration in recrystallisation, a short stem funnel warmed above the receiving flask is the better choice.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)