Search

In Stock

Micro-SD Card Module

₹345.00

Quick Answer: The Micro-SD Card Module is a small breakout board with a micro-SD card socket that lets an Arduino or other microcontroller write and read files on a memory card. In STEM labs it is used mainly for data logging, saving sensor readings to a file that can later be opened on a computer.

Turning a Microcontroller into a Data Logger

An Arduino has very little memory of its own, and whatever it measures is lost when the power goes off. A micro-SD card module solves both problems. Readings from a temperature, light or distance sensor are written line by line to a text file on the card, usually as comma-separated values, and after the experiment the card goes into a computer where the file opens directly in a spreadsheet for graphing.

Modules of this kind communicate over the SPI bus, the same four-wire serial link used by many other boards, and the standard Arduino SD library provides simple commands to open, write and close files. SD cards themselves work at 3.3 V; common breakout boards include a regulator and level shifting so they can be wired to a 5 V Arduino, but that should be checked for the version supplied.

What Students Learn Along the Way

Logging projects teach more than wiring. Students decide how often to sample, what to write in each line, and how to label the file, which are the same decisions scientists make in real experiments. Combining the module with the RFID Module with Card and Badge produces a working attendance logger, and the shared SPI bus becomes a practical lesson in how several devices talk to one controller.

Specifications

Item Micro-SD card breakout module
Interface SPI (MOSI, MISO, SCK, chip select)
Card type Micro-SD card (card normally purchased separately)
Software Arduino SD library, FAT16/FAT32 formatted cards
Supply voltage (3.3 V or 5 V tolerant) Confirm at enquiry

Applications

  • Logging temperature, light or sound readings over hours or days
  • Recording results of physics experiments for graphing in a spreadsheet
  • Attendance systems that store RFID tag reads with time stamps
  • Storing configuration files, text or sound clips for projects

Care & Handling

  • Never remove the card from the micro-SD card module while the program is writing; close the file first or the data may be lost.
  • Insert and remove cards gently and straight; the spring socket is small and easily bent.
  • Store boards in antistatic bags and keep cards in their cases when not in use.

Why Choose LabEquip

Computer science and physics teachers who want students to collect real data over time use SD logging as the natural next step after reading a sensor. LabEquip lists this module with its TLM Kits, alongside controllers and other boards. Send your quantities through the contact page.

Frequently Asked Questions

How does the module connect to an Arduino Uno?

It uses SPI: MOSI to pin 11, MISO to pin 12, SCK to pin 13 and chip select to any free digital pin, often pin 10, plus power and ground. The chip-select pin number must match the one given in the program.

How should the card be formatted?

The Arduino SD library reads FAT16 and FAT32. Most cards up to 32 GB come formatted as FAT32; larger cards usually use exFAT and must be reformatted, so a smaller card is the simpler choice for class projects.

Can it be connected to a 5 V Arduino?

SD cards run at 3.3 V. Many micro-SD modules include a voltage regulator and level shifter so they can be wired to 5 V boards, but some do not, so confirm the version when you enquire before connecting it.

Why is my data file empty or incomplete?

Data is held in a buffer until the file is closed or flushed. If power is removed or the card taken out first, the last readings are lost. Close the file after each write or call flush regularly in long logging runs.

Can it share the SPI bus with other modules?

Yes. Several SPI devices can share MOSI, MISO and SCK as long as each has its own chip-select pin, and only one is selected at a time. An RFID reader and an SD module often run together this way.

What file format suits student data?

A plain text file with comma-separated values, one reading per line with a time or sample number first. It opens straight into a spreadsheet, where students can plot graphs and calculate averages.

Last Updated: September 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)