Quick Answer: A mass hanger plate is a small round plate with a central rod and a suspension hook, onto which slotted masses are stacked. The mass hanger plate turns a pile of separate masses into one load that can be hung from a spring, a string over a pulley or a lever to apply a known force.
The Hanger Is Part of the Load
The commonest mistake with a mass hanger plate is to forget its own mass. A hanger carrying three 50 g slotted masses does not apply the weight of 150 g; it applies the weight of 150 g plus the hanger. Students should weigh the hanger on a balance at the start, write its mass in their table and add it to every load.
The force applied is then W = mg, with m the total mass in kilograms. For a hanger and masses totalling 250 g, the force is 0.250 × 9.81 ≈ 2.45 N. Working in newtons from the start avoids mixing grams and newtons on the force axis of a graph.
Hanging It Correctly
Slide the slotted masses onto the rod so they rest flat on the plate, turning each slot a little away from the one below so the stack cannot slip off sideways. Hang the mass hanger plate from its hook and let it come to rest before reading anything; a swinging load gives a spring a larger, changing extension.
Over a pulley the hanger’s weight becomes the tension in the string, provided the hanger is not accelerating. If it is accelerating, as in Newton’s second law experiments, the tension is less than the weight.
Specifications
| Product | Mass holder plate (hanger) for slotted masses |
| Form | Round base plate with central rod and suspension hook |
| Function | Carries stacked slotted masses as a single load |
| Force applied | Weight of hanger plus masses, W = mg |
| Hanger mass and rod size | Confirm at enquiry |
Where It Is Used
- Loading springs in Hooke’s law experiments
- Providing the pulling force over a pulley in dynamics practicals
- Hanging loads on a lever or moments beam
- Pulling a block up an inclined plane via a pulley
Care & Handling
- Weigh the hanger before each practical and include its mass in every load
- Lower the loaded hanger gently onto a spring rather than letting it drop
- Keep the hook closed enough that it cannot slip off a loop or eye
- Store with the slotted masses removed, in a dry place
Why Choose LabEquip
Mass hanger plates are a constant reorder item for physics labs, since every Hooke’s law, pulley and lever station needs one. LabEquip supplies them with matching slotted masses and alongside the spring extension apparatus in our physics lab equipment range; send LabEquip your station count.
Frequently Asked Questions
Does the hanger’s own mass count?
Yes. The hanger is part of the load hung from the spring or string, so its mass must be added to the slotted masses every time a force is calculated.
How do I find the hanger’s mass?
Weigh it on a balance before the practical. If a value is marked on it, the balance check confirms it and catches any change from damage or added parts.
How is the load converted into a force?
Add the hanger and slotted masses, convert to kilograms and multiply by 9.81 N/kg. For example, 0.250 kg gives a force of about 2.45 N.
Can the hanger be used over a pulley?
Yes. Tie the string to the hook and run it over the pulley. When the hanger hangs still, the string tension equals its total weight; when it accelerates, the tension is smaller.
Why should the loaded hanger be allowed to settle?
A swinging or bouncing load stretches a spring by a changing amount. Waiting until the hanger is still gives the true static extension.
Which slotted masses fit this hanger?
Slotted masses whose slot and centre hole suit the rod. The hanger mass and rod size can be confirmed at enquiry so that existing masses can be matched to it.
Last Updated: October 2026










Reviews
There are no reviews yet.