Quick Answer: The Weight, 10Kg, Class F2 is a single 10 kg test weight titled in accuracy class F2. A 10 kg F2 test weight is a practical size for checking bench and platform scales: heavy enough to test their working range, yet light enough for one person to move to each corner of a platform.
The Corner Test on a Platform Scale
A platform that rests on four load cells, or on a lever system, can read differently depending on where the load sits. To find out, place the weight in the centre and note the reading, then move it to the middle of each quarter of the platform in turn. Ideally all five readings agree. A corner that reads high or low points to a load cell or lever out of adjustment, a foot that is not taking its share, or dirt trapped under the platform.
Level the scale and check that it moves freely before starting, since a tilted or fouled platform produces corner errors of its own. Repeating the test after any repair shows whether the fault has really been cleared.
Building Larger Test Loads
Several 10 kg weights placed side by side or stacked carefully give higher test points while each piece stays manageable to lift. Every weight should be identified, by number or mark, so that its own certificate value can be added into the total. When the scale’s capacity is far beyond the weights available, the remaining range is covered by substitution, described on the 20 kg F2 test weight page.
Why Class F2 Suits This Work
Bench and platform scales are usually graded in intervals that are coarse compared with the permissible error of an F2 weight of this size, so the weight’s own error has little influence on the check. F2 weights are also the usual references for checking the M-class weights that shops and stores use every day.
Where It Is Used
- Corner (eccentric-load) tests on bench and platform scales
- Regular span checks on scales in packing, dispatch, stores and canteen kitchens
- Building multi-weight test loads with several identified 10 kg pieces
- Checking M-class working weights used for daily trade checks
Care & Handling
- Lift the 10 kg F2 test weight by its knob or handle and set it down gently, never dropping it onto a platform.
- Keep it dry and wipe off dust or moisture before storage, since corrosion and dirt change its mass.
- Mark or number each weight in a group so its own value can be traced in records.
- Store it off the floor on a shelf, away from forklift routes and cleaning water.
Specifications
| Nominal value | 10 kg, as titled |
| Accuracy class | F2, as titled |
| Supplied as | Single individual weight |
| Typical role | Working test weight for bench and platform scales |
| Shape, material, finish and calibration documents | Confirm at enquiry |
Why Choose LabEquip
Warehouses, food processors, workshops and college labs buy 10 kg F2 weights as the everyday check load for their bench and platform scales. LabEquip lists them in its Physics Equipments range; a platform scale is a typical instrument they are used on. Tell us how many weights and what scales you have through the contact page.
Frequently Asked Questions
Where exactly should the weight go in a corner test?
In the middle of each quarter of the platform, roughly halfway between the centre and each corner, rather than at the extreme edge. That position loads the nearest support strongly while keeping the weight safely on the platform.
What does it mean if one corner reads high?
The support under that corner is carrying more of the reading than it should, often because a load cell needs adjustment, the scale is not level, or debris is lodged under the platform. Investigate before using the scale for important weighing.
How many 10 kg weights are needed to test a scale?
That depends on the scale capacity and the test plan. A typical plan checks several points up to near capacity; where the weights run out, the substitution method extends the test with other stable loads.
What force does a 10 kg weight exert?
Under normal gravity of about 9.8 metres per second squared it weighs about 98 newtons. A scale shows kilograms because it has been adjusted for local gravity, which is one reason scales are adjusted at the place where they will be used.
Can the weight be used on a scale in a wet area?
It can be used there, but it should be wiped dry afterwards and not left standing in water. Moisture and corrosion change the mass of a weight over time, especially where the surface finish is damaged.
When would a 10 kg F1 weight be chosen instead?
When the balance being tested reads in very fine steps relative to 10 kg, such as a high-capacity precision balance, or when the weight will serve as a reference for calibrating other weights.
Last Updated: October 2026










Reviews
There are no reviews yet.