Search

In Stock

Test Bench 2 Lighting Systems

Banc d'essai 2 systèmes d'éclairages + 2 ampoules Features two isolated wiring paths with dedicated switches, allowing for simultaneous side-by-side comparison of different bulb types under identical voltage conditions.

Integrated Power Measurement Ports Built with standard 4mm safety sockets for direct connection to wattmeters or multimeters to track real-time energy usage and current draw for each system.

₹1,230.00

Quick Answer: This lighting test bench is an enclosed unit with two lamp holders, each with its own switch, under a clear cover, so two lighting systems can be run side by side and compared. Classes use the lighting test bench to compare how much electrical power different lamp technologies draw for the light they give and how much heat they waste.

Comparing Lamp Technologies Fairly

A filament lamp makes light by heating a thin wire until it glows, and most of its electrical input leaves as infrared radiation and heat rather than visible light. A compact fluorescent lamp passes a discharge through low-pressure vapour and uses a phosphor coating to turn ultraviolet into visible light. An LED lamp produces light directly in a semiconductor junction. The useful comparison is luminous efficacy: light output in lumens divided by electrical power in watts.

The product photograph shows one conventional bulb shape and one spiral compact fluorescent lamp under the cover, with two switches on the front panel and a power cord at the back, so either lamp can be lit alone or both together.

Measuring Power, Light and Heat

Electrical power can be read from the lamp markings or measured with a suitable plug-in energy meter used by the teacher. Light output is compared with a light sensor held at the same distance from each lamp, and warmth with a temperature probe placed near each lamp inside the cover. Readings after a fixed warm-up time keep the comparison fair, because fluorescent lamps take a while to reach full brightness.

Applications

  • Comparing the luminous efficacy of two lamp types
  • Measuring the temperature rise near each lamp after the same running time
  • Timing how long a compact fluorescent lamp takes to reach full brightness
  • Using results to discuss household energy saving

Care & Handling

  • Use the bench only under teacher supervision, with the cover closed while lamps are lit
  • Switch off and unplug before changing a lamp, and let lamps cool first
  • Inspect the power cord and plug before each use and withdraw the unit if either is damaged
  • Dispose of fluorescent lamps through proper recycling, as they contain a small amount of mercury

Specifications

Product Test bench for two lighting systems
Lamp positions Two lamp holders, each with its own switch
Enclosure Clear cover over the lamps
Supply Power cord, as photographed
Comparisons Electrical power, light output, heat produced

Why Choose LabEquip

Science teachers covering energy efficiency at home use this kind of bench to replace claims on packaging with measurements students make themselves. LabEquip supplies it with the energy and efficiency models among its physics equipment; lamp and holder questions can be raised on the contact page.

Frequently Asked Questions

Which lamps can be fitted in the bench?

The photograph shows a standard bulb and a compact fluorescent spiral. The holder type and the lamps supplied can be confirmed when you enquire, and any lamp fitted must suit the holder and the supply.

Why does a filament lamp feel hotter than the other lamp?

A filament lamp turns most of its electrical energy into heat and infrared radiation, with only a small fraction becoming visible light. Lamps that make light by discharge or in a semiconductor waste far less as heat.

Why does a compact fluorescent lamp take time to reach full brightness?

The vapour inside the tube has to warm up before the discharge runs at full strength. Until then the light output is lower, so readings should be taken after the same warm-up time.

How can light output be compared without a lux meter?

A light sensor connected to a data logger, or a light-dependent resistor in a simple circuit with a meter, held at the same distance and angle from each lamp, gives a fair comparison.

What does luminous efficacy mean?

Luminous efficacy is the light output in lumens divided by the electrical power in watts. A higher value means more light for the same power, which is what an efficient lamp offers.

Is the bench safe for students to use?

It should be used under teacher supervision with the cover closed. Students should not touch hot lamps, and lamps should only be changed with the unit switched off and unplugged.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)