Quick Answer: A simple pendulum kit provides the parts for hanging a small, heavy bob on a light thread from a rigid support so that students can time its swings. The simple pendulum kit is used mainly to measure g, the acceleration due to gravity, from the way the period changes as the thread is lengthened.
From Swing Time to the Value of g
For small swings the period of a simple pendulum is T = 2π√(L/g), where L runs from the point of suspension to the centre of the bob. Squaring both sides gives T² = (4π²/g)L, so a graph of T² against L is a straight line whose gradient equals 4π²/g. Students take five or six lengths, time each one, plot the graph and find g as 4π² divided by the gradient. As a check on the arithmetic, a 0.50 m pendulum should have a period of about 1.42 s, so twenty swings take roughly 28 s.
The graph method has a useful property. If every length was measured to the top of the bob instead of its centre, each point is shifted by the same amount, the line misses the origin, and yet the gradient, and therefore g, is unaffected. Discussing that intercept is a good way to introduce systematic error.
Getting Clean Timings
Place a pin, a pencil line or a vertical marker behind the lowest point of the swing and start and stop the stopwatch as the bob passes it. The bob is moving fastest there, so the instant it crosses the mark is sharp, whereas at the end of a swing it seems to hang still. Count the first pass as zero, time twenty complete oscillations and repeat at least once.
Human reaction time adds roughly a tenth to two tenths of a second at each press of the button. Spread over twenty swings that is well under one percent of the total, which is why many swings are timed rather than one. Release the bob from rest along a single line so it does not drift into an elliptical path.
Specifications
| Product | Simple pendulum kit for practical work |
| Main measurement | Acceleration due to gravity, g, from T² against L |
| Governing relation | T = 2π√(L/g) for small swings |
| Also needed | Metre rule, stopwatch or light gate, protractor |
| Parts supplied | Confirm at enquiry |
Practicals the Kit Supports
- Finding g from the gradient of a T² against length graph
- Showing that the period does not depend on the mass of the bob
- Practising multi-swing timing to reduce reaction-time error
- Introducing simple harmonic motion before springs and oscillators
Care & Handling
- Clamp the support firmly so the suspension point cannot sway with the bob
- Replace frayed or kinked thread, which alters the effective length
- Store the thread loosely coiled and the bob separately so knots do not tighten
- Keep the swinging area clear of glassware and of students’ faces
Why Choose LabEquip
Physics departments running a g-measurement practical for a whole class need identical stations so that groups can compare gradients. LabEquip can supply the simple pendulum kit in matching sets, alongside the variable parameter pendulum for investigation work; contact LabEquip with the number of stations, or browse more physics lab equipment.
Frequently Asked Questions
Why does my T squared against length graph not pass through the origin?
Usually because the length was measured to the wrong point, for example to the top of the bob instead of its centre. That adds the same error to every length, which shifts the line sideways but leaves the gradient unchanged, so g from the gradient is still sound.
How accurate a value of g can a class expect?
With twenty swings timed carefully and lengths measured to the nearest millimetre, results within about 1 to 2 percent of 9.81 m/s² are realistic. The largest errors usually come from starting and stopping the stopwatch.
Where should timing start and stop?
At the lowest point of the swing, marked by a pin or line behind the bob. The bob moves fastest there, so the moment it passes the mark is easy to judge, unlike at the end of the swing where it is almost still.
Why does the bob sometimes swing in an ellipse?
It was given a slight sideways push when released, so it moves partly as a conical pendulum, which has a slightly shorter period. Stop it, pull it aside along one line and let go without pushing.
Does air resistance change the period?
Only very slightly. Air drag makes the swings die away, but for a small dense bob the period stays almost constant as the amplitude falls, which is why a dense metal bob is preferred to a light plastic one.
What is in the kit?
The exact parts can be confirmed at enquiry. The experiment itself needs a small dense bob, a light thread that does not stretch, a rigid clamp with a sharp suspension point, a metre rule and a stopwatch.
Last Updated: October 2026










Reviews
There are no reviews yet.