Quick Answer: This earthed power strip is a mains extension block with several earthed outlets on one lead, used to supply a group of instruments at a laboratory bench from a single wall socket. The product photograph shows a white strip of sockets with a red rocker switch and a moulded plug.
Sockets in Parallel
Inside the earthed power strip, every outlet is connected across the same live and neutral conductors, and every earth contact is joined to the earth conductor of the lead. Each socket therefore receives the full mains voltage regardless of what is plugged into its neighbours, which is the textbook definition of a parallel circuit. Switching off one appliance does not affect the others.
The consequence that matters for safety is in the lead. All the currents drawn by the connected apparatus add together in that single cable and plug. A strip with plenty of outlets invites a hot plate, a heater and a power supply to be plugged in together, and their total current can exceed what the strip or the wall socket is rated for even though each appliance alone is modest. Adding the power ratings and dividing by the mains voltage gives the total current to compare with the rating marked on the strip.
Setting Up a Bench Safely
Earthed outlets connect the metal casings of class I apparatus, such as ovens, water baths and hot plates, to the protective earth, so a fault trips the circuit protection instead of leaving a live case. The strip should be plugged directly into a wall socket rather than into another strip or an extension lead, placed where liquids cannot reach it, and kept off the floor where it could be kicked or soaked. The switch visible in the photograph lets a whole bench be isolated at the end of a practical.
Specifications
| Product | Earthed mains power strip |
| Outlets | Earthed sockets; the product photograph shows five |
| Switch | Rocker switch shown in the product photograph |
| Connection | Moulded plug on a flexible lead |
| Wiring | All outlets in parallel; currents add in the lead |
| Socket standard, current rating and lead length | Confirm at enquiry |
Applications
- Supplying several mains instruments at one laboratory bench from a single wall socket
- Teacher demonstration tables with a projector, power supply and apparatus
- Isolating a bench’s apparatus with one switch at the end of a practical
- A real example for lessons on parallel circuits and current in supply cables
Care & Handling
- Add up the power of everything connected and keep the total within the strip’s marked rating
- Never plug one strip into another or into an extension lead
- Keep the earthed power strip off wet benches and floors and away from sinks
- Inspect the plug, lead and casing regularly and withdraw any strip that is cracked, scorched or loose
Why Choose LabEquip
Laboratory managers wiring up benches for practical classes buy earthed power strips to give each bench its own switched supply point. LabEquip can supply strips for your socket standard; state the plug type used in your country through our contact page, and see related physics lab equipment.
Frequently Asked Questions
Why are the outlets earthed?
The earth contact connects the metal case of apparatus to protective earth. If a live wire touches the case, current flows to earth and the circuit protection disconnects the supply, instead of the case staying live.
How many appliances can be plugged in at once?
As many as there are outlets, provided the total current stays within the strip’s rating. Add the power ratings of the appliances and divide by the mains voltage; heating apparatus such as hot plates and ovens use the most.
Are the sockets in series or parallel?
In parallel. Each outlet receives the full mains voltage independently, and the currents of all connected apparatus add together in the strip’s lead and plug.
Can the power strip be plugged into an extension lead?
This should be avoided. Chaining strips and leads adds connections that can overheat and makes it easy to exceed the rating of the first lead or wall socket. Plug the strip directly into a wall socket.
What does the switch do?
The rocker switch shown in the product photograph normally switches all the outlets together, so every piece of apparatus at the bench can be turned off in one action. Unplug the strip before inspecting or cleaning it.
Which plug and socket type is supplied?
Socket standards differ between countries, and the strip must match the wall sockets and appliance plugs in your laboratory. The socket standard, current rating and lead length can be confirmed at enquiry.
Last Updated: October 2026










Reviews
There are no reviews yet.