Search

In Stock

Pulley on bracket

Poulie sur chape, Low-Coefficient Friction Bearing Supports the technical Evaluation of ideal vs. non-ideal mechanical systems by minimizing parasitic energy loss during empirical trials.

Roulement à billes de haute qualité, Ruggedized Steel Frame Ensures long-term Consistency in results across multiple laboratory rotations, reducing the variance in student-collected data sets.

₹654.00

Quick Answer: A pulley on bracket is a grooved wheel that turns freely on an axle held in a U-shaped metal yoke, with attachment points on the yoke. The pulley on bracket can hang from a support as a fixed pulley or ride on the load as a movable pulley, so several can be combined into block-and-tackle systems.

Fixed and Movable Pulleys

Hung from a stand by its bracket, the pulley only changes the direction of the pull: the effort equals the load, apart from friction. Hooked to the load instead, with one end of the string tied to a fixed point above, the same pulley on bracket becomes a movable pulley. The load is now held by two string segments, so in an ideal system the effort is half the load, while the effort end moves twice as far as the load rises.

Adding more pulleys increases the number of string segments supporting the lower block. With four supporting segments, the ideal effort is a quarter of the load and the effort string moves four times as far. Students count the supporting segments to find the velocity ratio.

Measuring Efficiency

Real systems need more effort than the ideal. Measure the load and the effort with a force meter while pulling steadily, then work out the mechanical advantage, MA = load ÷ effort, and compare it with the velocity ratio, VR, from the segment count. Efficiency = MA ÷ VR × 100 percent.

For example, a 4.0 N load lifted with one movable pulley might need 2.3 N of effort, giving MA ≈ 1.74 against a VR of 2, an efficiency of about 87 percent. The losses come from friction at the axle and from lifting the weight of the movable pulley itself, which matters most with light loads.

Specifications

Product Single pulley mounted in a U-shaped bracket (yoke)
Mounting Hangs from a support or attaches to the load
Uses Fixed pulley, movable pulley, block and tackle
Quantities measured Mechanical advantage, velocity ratio, efficiency
Wheel diameter and bearing type Confirm at enquiry

Applications

  • Comparing fixed and movable pulleys
  • Building block-and-tackle systems with two or more pulleys
  • Measuring mechanical advantage, velocity ratio and efficiency
  • Showing that work out never exceeds work in

Care & Handling

  • Use thin, non-stretch cord that sits fully in the groove
  • Keep the axle clean and turning freely; check for wobble before each practical
  • Do not let a loaded system drop when the effort is released
  • Store pulleys with cords removed so knots do not jam the wheel

Why Choose LabEquip

Schools and colleges usually buy pulleys on brackets several at a time, because block-and-tackle work needs two to four per group. LabEquip can supply them with the rod-mounted pulley on rod and boss heads with suspension hooks from our physics lab equipment range; send LabEquip your group count.

Frequently Asked Questions

What is the difference between a fixed and a movable pulley?

A fixed pulley hangs from a support and only changes the direction of the force. A movable pulley rides on the load, so two string segments share the load and the effort is ideally halved.

How is the velocity ratio of a pulley system found?

Count the string segments that support the moving block. That number equals the velocity ratio, because the effort end must move that many times as far as the load.

Why is the measured effort larger than the ideal value?

Friction at the axles and the weight of the movable pulleys both have to be overcome as well as the load, so the effort is always somewhat more than load divided by the number of segments.

How is efficiency calculated?

Divide the measured mechanical advantage by the velocity ratio and multiply by 100. Efficiency rises with heavier loads, because the pulley’s own weight becomes a smaller share of the total.

What does the bracket add over a bare pulley wheel?

The U-shaped yoke holds the axle on both sides so the wheel cannot tilt, and its attachment points let the pulley hang from a support or carry a load, so pulleys can be chained together.

Which cord should run in the groove?

A thin, smooth, non-stretch cord that sits well down in the groove. Thick or stretchy cord rubs on the yoke, slips off the wheel and makes the effort reading unsteady.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)