Search

In Stock

Prism, Superior/Crown Glass

High-Index Borosilicate Composition: Fabricated from premium crown glass with a high Abbe number (low dispersion coefficient), ensuring maximum light transmission and minimal internal absorption for sharp spectral line visualization.

Optical-Grade Surface Flatness: Features diamond-polished faces with precise equilateral 60-degree angular tolerances, meticulously calibrated to eliminate wavefront distortion and ensure high-fidelity beam manipulation during minimum deviation measurements.

$4.74

Quick Answer: The Prism, Superior/Crown Glass is a solid prism of crown glass, the lower-dispersion family of optical glass, listed as a superior grade for refraction work. A crown glass prism is used on the spectrometer table to measure the angle of the prism and the angle of minimum deviation, giving the refractive index and the dispersive power of the glass.

Crown Glass and Dispersive Power

Optical glasses fall broadly into two families. Crown glass has a lower refractive index and lower dispersion; flint glass contains heavier oxides that raise both. A crown prism therefore gives a narrower spectrum of bright, distinct lines, which suits measurement of individual spectral lines on a student spectrometer.

Dispersive power describes how strongly a material spreads colours compared with how strongly it bends light. It is the difference between the refractive indices for violet and red light, divided by the mean refractive index minus one. Measuring the minimum deviation for each line of a mercury lamp gives the index for each colour, and from these the dispersive power, or a graph of refractive index against wavelength.

Spectrometer Technique

Level the prism table and adjust the collimator and telescope for parallel light. To measure the angle of the prism, turn its refracting edge towards the collimator so light reflects from both faces, find each reflected image of the slit with the telescope and halve the angle between the two telescope positions. Then rotate the table to find the minimum deviation for each spectral line in turn. For pin-method practicals the standard glass prism is the usual choice, and liquids are measured in the hollow glass prism.

Applications

  • Refractive index of crown glass for sodium light
  • Dispersive power from the lines of a mercury spectrum
  • Plotting refractive index against wavelength to test Cauchy’s relation
  • Comparing crown and flint glass where a flint prism is also available

Specifications

Material Crown glass, as titled
Grade Listed as superior
Use Spectrometer measurement of prism angle, minimum deviation and dispersive power
Light sources Sodium or mercury vapour lamp
Refracting angle and face size Confirm at enquiry

Care & Handling

  • Pick the prism up by its triangular ends, never by the refracting faces.
  • Clean the faces with lens tissue only, after blowing off dust.
  • Keep it in a padded case; chipped edges reduce the usable face.
  • Clamp it lightly on the prism table so it cannot slide off.

Why Choose LabEquip

College and university physics laboratories running spectrometer experiments keep crown glass prisms as standard station equipment. LabEquip lists this prism in its physics equipment range; to equip several spectrometers, send your numbers through the contact page.

Frequently Asked Questions

What is the difference between crown glass and flint glass?

Crown glass has a lower refractive index and lower dispersion; flint glass contains heavier oxides that raise both. A flint prism spreads the spectrum more widely, while a crown prism gives a narrower spectrum of bright lines.

How is the angle of the prism measured on a spectrometer?

Turn the refracting edge towards the collimator so light reflects from both faces. Find each reflected image of the slit with the telescope; the angle of the prism is half the angle between the two telescope positions.

What is dispersive power?

It compares how strongly a material spreads colours with how strongly it bends light. It equals the difference between the refractive indices for violet and red light divided by the mean refractive index minus one.

Which lamp should be used with a crown glass prism?

A sodium lamp gives one bright yellow line pair for refractive index measurement. A mercury lamp gives several well-separated lines, which are needed for dispersive power and for plotting refractive index against wavelength.

Why handle the prism only by its ends?

Fingerprints on the polished refracting faces scatter light and blur the slit image in the telescope. Holding it by the triangular ends keeps the faces clean.

Can this prism be used for the pin method too?

Yes. It works on a drawing board like any solid prism, although for pin practicals with large groups a standard glass prism is the more usual choice.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)