Search

In Stock

Pipes for Pressure Drop Experiments

Tubes pour expériences pertes de charges, Factory-Integrated Pressure Tappings enable precise Evaluation of energy gradients along the flow path, reinforcing evidentiary-grade data acquisition for Darcy-Weisbach calculations.

High-Transmittance Material Architecture supports the visual Observation of flow regimes (laminar vs. turbulent) when utilized in conjunction with dye injection systems.

₹1,350.00

Quick Answer: Pipes for pressure drop experiments are lengths of tube used to measure how the pressure of a flowing liquid falls along a pipe. Fed at a steady rate and read at both ends, they let students compare the loss for different lengths and bore diameters.

Length and Bore

For the same flow rate, the pressure loss along a pipe is proportional to its length: every metre of wall exerts the same friction on the same flow, so a pipe twice as long loses twice as much. Bore diameter has a far stronger effect. In slow, laminar flow Poiseuille’s law gives Δp = 8μLQ/(πr⁴), so at a fixed flow rate halving the radius multiplies the loss by sixteen.

In faster, turbulent flow the dependence on bore is steeper still, close to the inverse fifth power of the diameter at a fixed flow rate. That is why a slightly undersized pipe in a building’s plumbing makes such a difference to the pressure at the far end, and why the comparison is so striking in class.

Running the Comparison

Feed each pipe from a constant-head source, such as an overflow tank or a Mariotte’s flask, so the driving pressure does not drift during a run. Read the pressure at the inlet and outlet ends on manometer tubes or a gauge, and measure the flow rate by timing the collection of a known volume. Changing one dimension at a time, length or bore, keeps the comparison fair.

With a narrow pipe and a slow flow the same data give the viscosity of water, by rearranging Poiseuille’s law as μ = πr⁴Δp/(8LQ). Note the water temperature, because the viscosity of water falls by roughly 2 percent for each degree of warming near room temperature.

Specifications

Product Pipes for measuring pressure loss in flow experiments
Variables compared Pipe length and bore diameter
Laminar relation Δp = 8μLQ/(πr⁴), Poiseuille’s law
Used with Constant-head supply, manometer or gauge, measuring cylinder and stopwatch
Number of pipes, bores, lengths and material Confirm at enquiry

Applications

  • Showing that pressure loss grows in proportion to pipe length
  • Measuring the strong effect of bore diameter on loss
  • Finding the viscosity of water from laminar flow data
  • Watching the change from laminar to turbulent flow as the flow rate rises

Care & Handling

  • Flush the pipes with clean water after use and drain them fully
  • Avoid kinking or crushing a pipe; a dent changes the bore locally
  • Keep pipe ends clean so connections to the tappings seal
  • Store the pipes straight and supported along their length

Why Choose LabEquip

Teachers and lecturers building a pipe-flow practical need pipes that differ in one dimension at a time, so the effects of length and bore can be separated. Use them with the pressure drop model and feed them from Mariotte’s flask; contact LabEquip to confirm the set, or browse more physics lab equipment.

Frequently Asked Questions

How does pipe diameter affect the pressure drop?

Very strongly. In laminar flow at a fixed flow rate the loss varies with the inverse fourth power of the radius, so halving the radius increases it sixteen times. In turbulent flow the effect is stronger still.

Why is the loss proportional to length?

Each metre of pipe applies the same wall friction to the same flow, so each metre removes the same amount of pressure. Twice the length gives twice the loss at the same flow rate.

How can viscosity be found with these pipes?

Run a slow, laminar flow through a narrow pipe, measure the pressure difference, length, radius and flow rate, and rearrange Poiseuille’s law as μ = πr⁴Δp/(8LQ).

Why should the water temperature be noted?

The viscosity of water falls by roughly 2 percent for each degree of warming near room temperature, so results taken at different temperatures are not directly comparable.

How do I keep the flow rate steady during a run?

Feed the pipe from a constant-head source such as an overflow tank or a Mariotte’s flask, rather than from a bottle whose level falls as it empties.

Which pipe sizes are supplied?

The number of pipes, their bores and lengths can be confirmed at enquiry. For a clear comparison a set should include two bores of the same length and two lengths of the same bore.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)