Quick Answer: Mariotte’s flask is a closed vessel with an outlet near its base and an open air tube passing down through its stopper into the liquid. While the liquid level stays above the lower end of that tube, Mariotte’s flask delivers liquid at a constant rate, however much remains inside.
Why the Flow Stays Constant
In an ordinary open bottle the jet weakens as the bottle empties, because the pressure at the outlet depends on the depth of liquid above it. This flask is sealed at the top, so as liquid flows out the air trapped above it expands and its pressure falls below atmospheric. Outside air then bubbles in through the lower end of the air tube, and at that point the pressure is held at exactly atmospheric pressure.
The pressure at the outlet therefore depends only on how far the outlet lies below the end of the air tube, not on the position of the free surface. As the level drops, the falling pressure of the trapped air compensates exactly for the shrinking depth, and the outflow continues unchanged until the level reaches the bottom of the tube.
Torricelli’s Law and Constant-Head Uses
The speed of the outflow follows Torricelli’s law, v = √(2gh), where h is the height of the air tube’s lower end above the outlet. With h set at 20 cm the water leaves at about 2 m/s. Sliding the tube up or down changes h, so students can measure the flow rate at several settings and plot it against √h, or measure how far the jet travels across the bench.
Because it delivers a flow that does not drift during a run, the flask is a convenient constant-head supply for other experiments, such as measuring viscosity with a narrow capillary tube or comparing the pressure loss along pipes of different bore.
Specifications
| Product | Mariotte’s flask (constant-head vessel) |
| Key feature | Sealed top with an air tube open to the atmosphere |
| Outflow | Constant while the level is above the end of the air tube |
| Outflow speed | v = √(2gh), h from the end of the air tube to the outlet |
| Material, capacity and number of outlets | Confirm at enquiry |
Applications
- Showing that a constant head gives a constant flow rate
- Testing Torricelli’s law by changing the height of the air tube
- Supplying a steady flow for capillary viscosity and pipe-friction experiments
- Comparing with an open vessel whose outflow slows as it empties
Care & Handling
- Seat the stopper and air tube firmly; any leak into the space above the liquid stops the effect
- Fill with the outlet closed, then open it and wait for steady bubbling before timing
- Rinse with clean water and drain completely after use
- Store the vessel upright and handle any glass parts with care
Why Choose LabEquip
Physics and engineering teachers reach for Mariotte’s flask whenever an experiment needs a flow that stays the same throughout the run. It makes a natural constant-head supply for the pipes for pressure drop experiments; contact LabEquip to confirm capacity and outlets, or browse more physics lab equipment.
Frequently Asked Questions
Why does the flow stay constant while the water level drops?
Air enters through the bottom of the air tube, which fixes the pressure there at atmospheric. The pressure at the outlet then depends only on how far the outlet sits below the end of that tube, not on the water level above it.
What happens once the level falls below the bottom of the air tube?
The flask behaves like an ordinary open vessel. The pressure at the outlet now depends on the falling water level, and the flow slows steadily as it empties.
How fast does water leave the outlet?
Roughly √(2gh), where h is the height of the air tube’s end above the outlet. With h equal to 20 cm the speed is about 2 m/s; friction in a narrow outlet makes the real value a little lower.
Why does air bubble in through the tube?
As water flows out, the air trapped above the liquid expands and its pressure drops below atmospheric. Outside air then pushes in through the tube to make up the volume, which shows the flask is working.
Can the flow rate be adjusted?
Yes, by sliding the air tube up or down to change h, or by changing the outlet. A graph of flow rate against the square root of h is a straight line.
Is the flask related to the Boyle-Mariotte gas law?
Only by name. The gas law links the pressure and volume of a trapped gas, while the flask is a fluids device for a steady outflow; both are named after Edme Mariotte, who studied gases and liquids.
Last Updated: October 2026










Reviews
There are no reviews yet.