Search

In Stock

Pascal’s Wager

Paradoxe de Pascal, High-Sensitivity Pressure Membrane & Pointer Enables technical Evaluation of force equilibrium, allowing for precise quantification of the vertical force exerted on the base of the liquid column.

Integrated Liquid Height Index Supports the Application of Evidentiary-Grade Measurement Protocols, ensuring repeatable data acquisition across undergraduate fluid mechanics modules.

Ruggedized Leak-Proof Seals Expérience visuelle et démonstrative 4 formes différentes à comparer, ensure longitudinal experimental Consistency in high-cadence laboratory environments, reducing setup time and maintaining classroom infrastructure integrity.

$52.25

Quick Answer: Pascal’s paradox apparatus is a hydrostatics demonstrator in which vessels of different shapes are fitted in turn over the same base, closed by a flexible membrane linked to an indicator. Pascal’s paradox apparatus shows that the pressure on the base depends only on the depth and density of the liquid, not on the vessel’s shape or volume.

Measuring Pressure Against Depth

With Pascal’s paradox apparatus the experiment can be made quantitative. Fill one vessel in stages, read the indicator at each depth and plot the reading against the height of the liquid above the membrane. The points fall on a straight line, as p = ρgh predicts. Change to a vessel that widens upwards, or one that narrows, and the points land on the same line even though the amount of water at each depth is very different.

Replacing tap water with a strong salt solution makes the line steeper, because the density ρ is larger, and the ratio of the two gradients gives the relative density of the salt solution. That turns a qualitative surprise into a measurement.

Pascal’s Barrel

The paradox is often told through Pascal’s barrel. A tall, thin tube was fixed into the lid of a full, sealed barrel and water was poured into the tube. Only a small volume was added, but because it raised the water level by several metres the pressure inside rose enough to force water out through the barrel’s seams. The force on any surface depends on the pressure there multiplied by the area, and the pressure depends on depth alone.

In this apparatus the membrane plays the part of the barrel wall: a narrow vessel and a wide vessel filled to the same height push on it equally.

Specifications

Product Pascal’s law apparatus for base pressure (hydrostatic paradox)
Principle Pressure at depth h: p = ρgh, independent of vessel shape
Base Flexible membrane linked to a pressure indicator
Vessels Interchangeable vessels of different shapes on a common base
Number of vessels and type of indicator Confirm at enquiry

Demonstrations and Measurements

  • Showing the hydrostatic paradox with straight, flared and narrowing vessels
  • Plotting indicator reading against depth to confirm p = ρgh
  • Comparing water with salt solution to estimate relative density
  • Introducing why dam walls are thickest at the bottom

Care & Handling

  • Fill and empty the vessels slowly so surges do not overstretch the membrane
  • Drain and dry the apparatus after use and keep the membrane out of sunlight
  • Rinse thoroughly after salt solution to prevent residue on the membrane and joints
  • Seat each vessel squarely so the seal does not leak

Why Choose LabEquip

Schools and colleges teaching fluid pressure buy this apparatus to move the hydrostatic paradox from a demonstration to a graph. LabEquip also supplies the equal cross-section vessel set and the Weinhold-type Pascal’s law apparatus among its physics lab equipment; ask LabEquip which suits your course.

Frequently Asked Questions

What does this apparatus measure?

It shows the pressure that a column of liquid exerts on the base of a vessel. The indicator responds to the push on the membrane, so readings can be compared for different depths, vessel shapes and liquids.

Why do vessels holding different amounts of water give the same reading?

Pressure at the base depends only on the depth of liquid above it and the liquid’s density. In a flared vessel the sloping walls carry the weight of the extra water, and in a narrowing vessel the walls push down on the liquid, so the base feels the same pressure.

What graph should students plot?

Plot the indicator reading against the depth of liquid above the membrane. Results from every vessel shape should lie on one straight line through the origin, showing that pressure is proportional to depth.

What happens if salt water is used instead of tap water?

Salt water is denser, so at the same depth the reading is higher and the graph is steeper. The ratio of the gradients for salt water and tap water gives the relative density of the salt solution.

What was Pascal’s barrel experiment?

Pascal is said to have burst a sealed barrel by pouring a small amount of water into a tall, narrow tube fixed in its lid. The height of the water column, not its volume, raised the pressure inside.

Why should air bubbles be removed from under the vessel?

Trapped air compresses and cushions the membrane, so the indicator lags behind the true pressure. Tilting the vessel slightly while filling lets the bubbles escape.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)