Search

In Stock

Pascal’s Sphere

Sphère de Pascal, Precision-Fitted Plunger Assembly Enables the technical Application of manual force to demonstrate undiminished pressure transmission (Pascal’s Law) in vocational fluid dynamics trials.

High-Transmittance Housing Supports the Evaluation of fluid velocity parity across all exit vectors, reinforcing evidentiary-grade laboratory reporting and data synthesis.

$11.67

Quick Answer: Pascal’s sphere is a hollow sphere pierced with small holes all over, fitted to a cylinder with a plunger. When the sphere and cylinder are filled with water and the plunger is pushed, water squirts from every hole, showing that pressure applied to an enclosed fluid is transmitted in all directions.

What the Jets Show

Students usually expect the push of the plunger to drive water forwards only. Instead, water leaves every hole at once, including those that face back towards the plunger. The plunger does not push the water in one direction; it raises the pressure everywhere in the enclosed water by the same amount, and every hole has that extra pressure behind it. This is Pascal’s principle.

Each jet leaves at right angles to the surface of Pascal’s sphere, because the pressure of a fluid always acts perpendicular to the surface it touches. Close to the sphere the jets look much alike; further out, each one bends downwards under gravity, like any projectile.

From the Sphere to Hydraulic Machines

The same transmitted pressure is what makes hydraulic jacks, presses and car brakes work. A small force on a small piston creates a pressure that acts on a much larger piston, where it produces a proportionally larger force, F₂ = F₁ × A₂/A₁. Showing the sphere first gives students the idea that pressure spreads through the whole liquid, and the force multiplication then follows naturally.

The demonstration can also be repeated with smoke in place of water. Smoke streams out of every hole in the same way, showing that gases transmit pressure too, but because a gas is compressible the plunger travels further before the streams appear.

Specifications

Product Pascal’s sphere with plunger cylinder
Principle Pressure applied to an enclosed fluid is transmitted in all directions
Observation Jets from every hole, each leaving at right angles to the surface
Fluids Water, or smoke for a gas version
Material, sphere size and number of holes Confirm at enquiry

Lessons It Supports

  • Demonstrating Pascal’s principle in middle and secondary school
  • Showing that fluid pressure acts at right angles to a surface
  • Introducing hydraulic brakes, jacks and presses
  • Comparing a liquid with a compressible gas

Care & Handling

  • Fill it under water, working the plunger, so trapped air is expelled
  • Push the plunger steadily; a sudden thrust can strain the seal and spray the room
  • Work over a sink or tray and keep the jets away from electrical equipment
  • Empty and dry it after use, and lubricate a stiff plunger seal lightly

Why Choose LabEquip

Middle and secondary school teachers use Pascal’s sphere because the result, water leaving every hole at once, is immediate and easy to discuss. Follow it with the hydraulic press apparatus to show force multiplication; contact LabEquip for supply, or browse more physics lab equipment.

Frequently Asked Questions

Why does water come out of the holes facing back towards the plunger?

Because the plunger raises the pressure throughout the water by the same amount rather than pushing it one way. Every hole, whichever way it faces, has the same extra pressure behind it.

Why do the jets leave at right angles to the sphere?

Pressure in a fluid always acts perpendicular to the surface it is in contact with. Each hole releases water along the direction of that force, so the jets point straight outwards from the surface.

Why do the jets curve downwards?

Once outside the sphere the water is a projectile, so gravity bends each jet into a curved path. Close to the holes, before gravity has had much effect, the jets look similar in strength.

Can the demonstration be done with a gas?

Yes, by filling the sphere with smoke and pushing the plunger; smoke streams out of every hole. Because a gas is compressible, the plunger moves further before the streams appear.

How is this related to a hydraulic jack?

A jack uses the same transmitted pressure: a small force on a small piston creates a pressure that acts on a large piston, giving a larger force in proportion to the ratio of their areas.

How do I clear air bubbles before the demonstration?

Hold the sphere under water and work the plunger in and out several times so water replaces the trapped air. Bubbles absorb part of the push and weaken the jets.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)