Quick Answer: This paper chromatography kit is pictured as a set of tall, narrow glass tubes standing on round feet, together with strips of chromatography paper. Each tube takes one strip and a little solvent, so the paper chromatography kit lets a group run several separations side by side and compare the results.
Why Tall, Narrow Tubes
A long paper strip separates a mixture over a greater distance, so spots with similar Rf values end up further apart and are easier to tell apart. Tall narrow tubes suit long strips: only a small volume of solvent is needed in the bottom, the narrow space fills with solvent vapour quickly, and the strip hangs straight without touching the walls if it is cut to the right width.
With the six tubes pictured, a group can run six samples at once, for example several marker inks, a set of food colourings and a reference dye, or the same mixture in different solvents to find the one that gives the clearest separation.
Carrying Out the Experiment
Cut strips to suit the tube height, draw a pencil baseline near one end and add a small concentrated spot of each sample. Pour solvent into each tube to a depth below the baseline, lower the strip in, and close the top of the tube, for example with a stopper or a piece of film, to limit evaporation. When the solvent front is near the top, remove the strip, mark the front, dry it and measure the Rf values of the separated spots.
Specifications
| Product | Paper chromatography kit |
| Shown in photograph | Six tall glass tubes on round feet and paper strips |
| Method | Ascending paper chromatography, one strip per tube |
| Also needed | Solvent, pencil, ruler, means of closing the tube tops |
| Tube height, strip count and complete contents | Confirm at enquiry |
Experiments With the Kit
- Comparing several inks or food colourings in one lesson
- Testing which solvent gives the clearest separation of a dye mixture
- Separating leaf pigments on long strips to resolve the yellow and green bands
- Identifying an unknown dye by matching its Rf value with references run alongside it
Care & Handling
- Stand the tubes on a level, stable surface; tall glassware tips easily
- Wash and drain the tubes upside down after use and dry them before storage
- Use organic solvents only in a ventilated area and away from flames
- Store unused paper strips flat and dry in a closed bag or box
Why Choose LabEquip
Teachers choose this kit when they want long-strip separations and side-by-side comparisons in one practical. LabEquip supplies it with spare chromatography paper and its wider physics lab equipment range; contact LabEquip to check the contents before ordering.
Frequently Asked Questions
Why use tall tubes instead of a beaker?
Tall tubes hold long strips, which give more separation between spots. The narrow space also saturates with vapour quickly, so the solvent rises evenly.
How many samples can be run at once?
The pictured kit has six tubes, so six strips can be developed at the same time, each with one sample or a few spots side by side if the strip is wide enough.
What solvent should be used?
Water works for many food colourings and water-based inks. Permanent inks and leaf pigments need an organic solvent mixture, used with ventilation and away from flames.
Why should the tubes be covered during the run?
Covering the tops keeps solvent vapour in, so the paper does not dry out at the edges and the front stays level.
How is the Rf value worked out?
Divide the distance from the baseline to the centre of a spot by the distance from the baseline to the solvent front, both measured on the dried strip.
Can the strips be reused?
No. Once a strip has been developed it holds the separated samples. Use a fresh strip for each run.
Last Updated: October 2026










Reviews
There are no reviews yet.