Quick Answer: This pump option adds automatic watering to a programmable model greenhouse: a small water pump, fed from a water reservoir, is switched on and off by the greenhouse controller so that a soil-moisture reading can trigger watering. The model greenhouse pump turns a sensing project into a complete control system.
From Measurement to Action
A greenhouse model with sensors can measure temperature, humidity or soil moisture, but measurement alone changes nothing. Adding an actuator closes the loop: the controller compares the moisture reading with a threshold, and when the soil is too dry it switches the pump on until the reading recovers. Students meet the full sense-decide-act sequence used in real automated growing systems.
A small pump of this kind draws more current than a controller’s output pin can supply. That is why such pumps are switched through a relay or transistor driver, a separate circuit that lets a small control signal switch a larger current. Understanding why that switching stage is needed is one of the key electronics ideas in the project.
What Students Build and Learn
- Building a closed-loop automatic watering system
- Learning why relays or drivers are used to switch motors and pumps
- Programming thresholds, pauses and hysteresis
- Logging soil moisture over time
Programming the Watering
A first program can simply turn the pump on for a few seconds whenever the moisture value drops below a set level. Students soon find the weakness: water takes time to soak through the soil, so the sensor still reads dry and the pump keeps running, flooding the tray. Adding a pause after each watering, or switching on below one level and off above a higher one, solves it. That idea, hysteresis, is the same one used in thermostats.
Recording moisture readings over a day, with and without automatic watering, gives data to graph and discuss. The pump option is intended for a particular greenhouse model, so compatibility with your model and controller should be confirmed before ordering; LabEquip also lists a micro:bit greenhouse among its greenhouse models.
Specifications
| Item | Pump option (add-on) for a model greenhouse |
| Function | Automatic watering under program control |
| Switching | Through a relay or driver controlled by the greenhouse controller |
| Works with | Soil-moisture sensor and programmable interface |
| Compatible models, supply and contents | Confirm at enquiry |
Care & Handling
- Keep the controller, relay and power supply above any water and away from spills
- Never run the pump dry; keep its inlet below the water level
- Route the tubing so it cannot pull on the pump or drip onto electronics
- Empty and dry the reservoir when the model is stored
Why Choose LabEquip
STEM and technology teachers add the pump option when a sensing greenhouse project is ready to move on to control. LabEquip supplies it with other physics lab equipment for automation projects; tell us which greenhouse model you have via LabEquip contact.
Frequently Asked Questions
Why can’t the controller power the pump directly?
A pump motor needs more current than a controller’s output pin can supply. A relay or transistor driver lets the small control signal switch the larger pump current safely.
What is hysteresis in a watering program?
It means switching the pump on below one moisture level and off above a higher one. The gap stops the pump flicking on and off when the reading hovers near a single threshold.
Why does the pump keep running too long?
Water takes time to reach the sensor through the soil. A pause after each watering, or a higher switch-off level, prevents overwatering.
Can the pump run without water?
Most small pumps are damaged by running dry, because the water also cools and lubricates them. Keep the inlet submerged.
Which sensor triggers the pump?
Usually a soil-moisture sensor placed among the plant roots and read by the greenhouse controller. Temperature or humidity readings can be added to the program for other decisions.
Will the pump fit my greenhouse model?
It is an option for a particular model greenhouse. Tell us which model and controller you have and we will confirm whether it fits.
Last Updated: October 2026










Reviews
There are no reviews yet.