Search

In Stock

Non-Calibrated Continuous Coil Springs

Ressorts à spires jointives non calibrés, Uniform Wire Gauge and Pitch enables student Evaluation of comparative spring constants (k) across multiple experimental variables, reinforcing evidentiary-grade data acquisition.

Integrated Industrial End Loops support the secure Application of slotted masses for dynamic oscillation and wave motion trials, maintaining system integrity during high-cadence laboratory rotations.

₹750.00

Quick Answer: Close-coiled springs are helical springs whose coils touch each other when unloaded, and these are uncalibrated, meaning no stiffness value is supplied. Students use the close-coiled springs to find spring constants for themselves and to see the effect of the initial tension built into this type of spring.

Initial Tension and the Offset Graph

When close-coiled springs are wound, the coils are pressed together so tightly that a small load produces no extension at all. Only once the load exceeds this initial tension do the coils begin to separate. A graph of force against extension then starts on the force axis above the origin, and from there it is a straight line.

This is a useful surprise for students who expect every Hooke’s law graph to pass through the origin. The gradient of the straight part still gives the spring constant k, and the intercept on the force axis measures the initial tension. Open-coiled springs, with gaps between coils, have no such offset.

Why Uncalibrated Springs Suit Investigations

Because no value of k is marked, uncalibrated close-coiled springs make an honest investigation: the class has to measure the stiffness before it can use the spring. Different springs give different gradients, which students can rank and compare.

A second, independent method checks the static result. Hang a known mass on the spring, set it bouncing gently and time twenty oscillations. For a mass-spring system T = 2π√(m/k), so k = 4π²m/T². Comparing k from the graph with k from the timing shows how well the two methods agree; the spring’s own mass makes the timing value slightly low unless it is allowed for.

Applications

  • Measuring spring constants from force against extension graphs
  • Finding the initial tension from the force-axis intercept
  • Comparing a static k with a value from timing oscillations
  • Ranking several springs by stiffness in an open investigation

Specifications

Product Close-coiled (closely wound) helical springs
Calibration None; stiffness to be measured by the user
Characteristic Initial tension: no extension until a threshold load
Typical use Hooke’s law and mass-spring oscillation practicals
Number of springs and their sizes Confirm at enquiry

Care & Handling

  • Load in steps and stop well before the coils stay apart after the load is removed
  • Lower masses onto the spring gently rather than letting them drop
  • Hang the springs unloaded or lay them flat in storage
  • Keep springs dry to prevent rust, which changes their stiffness

Why Choose LabEquip

Close-coiled springs are bought by schools and colleges that want students to measure stiffness for themselves rather than read it off a label. LabEquip can supply them for use with the spring extension apparatus and other physics lab equipment; contact LabEquip for class quantities.

Frequently Asked Questions

What does close-coiled mean?

The coils of the spring touch each other when it is unloaded. The opposite, an open-coiled spring, has gaps between its coils and can also be compressed.

Why does a close-coiled spring not stretch under a small load?

The coils are wound pressed together, which builds in an initial tension. Until the load is larger than that tension, the coils stay closed and there is no extension.

Does the initial tension spoil a Hooke’s law graph?

No. The graph starts above the origin on the force axis, but the straight part has the same gradient, so the spring constant is found in the usual way.

What does uncalibrated mean for practical work?

No stiffness is stated, so the spring cannot be used to measure forces until it has been calibrated with known loads. That makes it a good subject for an investigation.

Can k be found by timing oscillations?

Yes. Time twenty bounces of a known mass and use k = 4π²m/T². The answer should be close to the static value; the spring’s own mass makes it a little lower.

How many springs and which stiffnesses are supplied?

The number of springs and their sizes can be confirmed at enquiry. For comparison work, having at least two noticeably different stiffnesses is useful.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)