Search

In Stock

Multirange Meter

Multi-Position Rotary Range Selector: Features low-contact resistance switching for seamless transition between diverse AC/DC scales, ensuring high-resolution data acquisition across milliampere and kilovolt spectrums without internal signal attenuation.

High-Damping Moving Coil Movement: Incorporates a precision-engineered permanent magnet moving coil (PMMC) mechanism with internal magnetic shielding, providing a rapid response time and ±2.0% full-scale accuracy for critical null-point observations.

$11.84

Quick Answer: A multirange meter is a single analogue meter with several current and voltage ranges, so one instrument can replace a set of separate ammeters, milliammeters and voltmeters on a student bench. It is used for DC circuit experiments where the size of the quantity changes from one practical to the next.

Several Meters in One Case

Inside the case is one moving-coil movement and a set of shunts and series resistors. Choosing a range, by a selector or by connecting to a particular pair of terminals depending on the design, switches the right resistance into circuit. A low-resistance shunt turns the movement into an ammeter for large currents, a larger shunt into a milliammeter, and a high series resistance into a voltmeter.

The dial carries several printed scales, one for each family of ranges. The commonest student mistake is reading the right pointer position on the wrong scale, so it helps to say aloud which range is in use and which scale belongs to it before writing anything down.

For schools, the appeal is economy of bench space and stock: one such meter on each bench covers practicals that would otherwise need three or four single-range meters, and the class learns early how range selection works.

Applications

  • General circuit work on student benches, from small currents to cell voltages
  • Ohm’s law and resistance experiments that need both current and voltage
  • Measuring current through lamps, resistors and motors in junior circuits
  • Teaching how shunts and multipliers change a meter’s range

Specifications

Type Analogue meter with several ranges (moving coil)
Quantities Direct current and voltage on several ranges
Range selection By selector or terminals, according to design
Scales Several scales printed on one dial
Ranges included Confirm at enquiry

Choosing the Right Range

When the expected current or voltage is unknown, start on the highest range and switch down until the pointer sits in the upper part of the scale. Switch off or disconnect before moving between current and voltage settings, and never leave the meter on a current range when it is about to be connected across a supply.

Care & Handling

  • Always check the selected range before connecting the meter to a circuit.
  • Disconnect before switching from a current range to a voltage range.
  • Keep the meter level and away from magnets and heat.
  • Wipe the case and window with a dry cloth; keep the terminals free of dust and corrosion.

Why Choose LabEquip

Schools that want flexible bench equipment without a cupboard full of single-range meters buy this instrument, often with a digital multimeter for the teacher’s bench. LabEquip includes it in its physics lab equipment, and the ranges required for your syllabus can be agreed through our contact page.

Frequently Asked Questions

What is the difference between a multirange meter and a multimeter?

This type of meter usually covers current and voltage on several ranges. A multimeter normally adds resistance and other functions, and many modern ones are digital.

How do I know which scale to read?

Each range corresponds to one of the printed scales. Note the full-scale value of the selected range and read the scale whose end figure matches it, multiplying if the range is a multiple of that scale.

Why start on the highest range?

If the quantity is larger than expected, a low range could drive the pointer hard against its stop and damage the movement. Starting high and switching down protects the meter.

Can it measure alternating current?

A moving-coil meter of this kind is designed for direct current. Alternating current needs a meter with a rectifier or a different movement.

Is one meter enough for an Ohm’s law experiment?

Two are better, one as an ammeter and one as a voltmeter, so both readings are taken at the same time. With a single meter, students must move it between positions for each reading.

Can students damage it by using the wrong setting?

Yes, mainly by connecting a current range across a supply. Teach students to check the range and the connection before switching on.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)