Search

In Stock

Moving Coil Meter, Rectangular Dial, Front Terminal (Ammeters, Milli-Ammeters, Micro-Ammeters, Voltmeters and Galvanometer)

Precision PMMC Movement: Engineered with sapphire jewel bearings and balanced knife-edge pointers, the internal mechanism ensures friction-free rotation and ±2.0% full-scale accuracy for sensitive electrical measurements.

Institutional-Grade Housing: Encased in impact-resistant, non-conductive ABS plastic with heavy-duty front-mounted safety terminals, designed to maintain structural integrity and secure low-resistance connections during high-frequency laboratory rotations.

₹845.00

Quick Answer: This rectangular dial moving coil meter is a permanent-magnet moving-coil (PMMC) instrument for direct-current circuits, with its terminals on the front panel beneath a rectangular scale. The pattern is offered as an ammeter, milliammeter, microammeter, voltmeter or galvanometer, so a school can equip a whole bench from one family of meters.

Inside a Permanent-Magnet Moving-Coil Meter

A coil of fine insulated wire, wound on a light rectangular former, is pivoted between the curved poles of a permanent magnet. A fixed soft-iron cylinder inside the coil makes the magnetic field radial, so the coil always lies along the field lines whatever its angle. When current flows, the forces on the sides of the coil produce a turning effect proportional to the current.

Two spiral hairsprings oppose that turning effect and also carry current into the coil. The pointer comes to rest where the spring torque balances the magnetic torque, and because both are proportional to their causes, the deflection is proportional to the current. That is why the scale of a moving-coil meter is evenly divided.

Damping comes from the former itself. Where it is made of aluminium, as is usual, its motion through the magnetic field induces eddy currents that oppose the motion, so the pointer swings to its reading and stops without oscillating for long.

The Rectangular, Front-Terminal Layout

In this pattern the scale sits behind a rectangular window and the terminals are on the front panel below it. The meter is made to sit on the bench with the dial facing the student, and leads run straight from the circuit to the front terminals without reaching round the case. The positive terminal is marked, which matters because a moving-coil meter responds to the direction of current.

Specifications

Type Permanent-magnet moving-coil (PMMC) meter for DC
Dial Rectangular
Terminals Front panel, polarity marked
Versions Ammeter, milliammeter, microammeter, voltmeter and galvanometer
Range of each version Confirm at enquiry

Applications

  • Measuring current and voltage in Ohm’s law experiments
  • Plotting the characteristics of resistors, lamps and diodes
  • Finding the internal resistance of a cell
  • Comparing currents in series and parallel circuits
  • Determining the figure of merit of the galvanometer version

Care & Handling

  • Choose a range above the expected reading and step down only when the deflection is small.
  • Keep meters away from strong magnets, which can weaken the meter’s own magnet and change its calibration.
  • Avoid dropping or jolting the meter; the pivots of the movement are delicate.
  • Set the pointer to zero with the zero adjuster, if fitted, before connecting.

Why Choose LabEquip

Schools fitting out student benches usually order the rectangular dial moving coil meter as a matched set of ammeters and voltmeters, with a galvanometer for null experiments. LabEquip offers it within its physics lab equipment, together with accessories such as a senior circuit board, and the ranges for each bench can be planned through our contact page.

Frequently Asked Questions

Why does a moving-coil meter only work on direct current?

The turning effect reverses whenever the current reverses. On alternating current the torque changes direction many times a second, the average is zero, and the pointer cannot follow, so it stays near zero.

Why is the scale evenly spaced?

The radial magnetic field makes the torque proportional to the current at every angle, and the hairsprings give a restoring torque proportional to the deflection. Equal steps of current therefore give equal steps of deflection.

Which versions are needed for a typical school electricity practical?

Most practicals need an ammeter or milliammeter in series with the circuit and a voltmeter across the component. A galvanometer is added for meter bridge and potentiometer experiments.

What happens if the meter is connected the wrong way round?

The pointer tries to move below zero and presses against its stop. Disconnect quickly and reverse the leads, matching the positive terminal to the positive side of the circuit.

What stops the pointer from swinging back and forth?

Eddy currents induced in the metal coil former as it moves through the magnetic field oppose the motion. This damping lets the pointer settle quickly at its reading.

How does this meter differ from the Superior version?

Both share the rectangular dial, front terminals and moving-coil principle. The Superior version is the higher-grade model in the same pattern, typically chosen for senior practicals where readings are recorded and graphed.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)