Search

In Stock

Moisture Analyzer – Touch Screen – 110g/0.001g

Halogen Infrared Thermal Matrix: Utilizes a high-efficiency circular halogen lamp for uniform, rapid heating up to 200°C, ensuring consistent thermal penetration and reproducible moisture evaporation across diverse sample textures and densities.

Interactive Capacitive Touch Interface: Features a high-definition digital display with real-time moisture curve visualization and internal memory storage for programmable drying profiles, enabling seamless GLP-compliant data management and export.

₹1,555.00

Quick Answer: The Moisture Analyzer – Touch Screen – 110g/0.001g is a loss-on-drying moisture analyzer with a touch-screen display, taking samples up to 110 g and weighing them to 0.001 g while they dry. A touch screen moisture analyzer suits laboratories that run different drying methods for different products and want operators to select them quickly.

Compared with the 60 g, 0.1 mg Model

LabEquip’s two moisture analyzers differ in weighing range and interface. This model takes samples up to 110 g and reads to 1 mg; the 60 g, 0.1 mg analyzer reads ten times finer but takes smaller samples. A larger capacity suits coarse, uneven materials such as grains, granules, feeds or soils, where a bigger sample is more representative, while the finer readability of the 60 g model suits small, uniform samples like pharmaceutical powders.

The touch screen makes it easier to choose and review drying programs, enter sample names and follow the drying curve on screen, depending on the software of the model.

Applications

  • Moisture in grains, feeds and oilseeds, where larger samples are more representative
  • Granules and powders in pharmaceutical and chemical production
  • Moisture of soils, sludges and building materials
  • Quality checks of dried foods such as spices, milk powder and pulses

Building a Drying Method

A reliable method is developed rather than guessed. Dry the material in an oven at a reference temperature and record its moisture. Then run the analyzer at a few temperatures and switch-off settings and choose the combination that matches the reference result in the shortest time without scorching. Record the sample size, spreading technique, temperature and end criterion as the standard method for that product, so that every operator selects the same settings on the display.

Specifications

Type Moisture analyzer with touch-screen display
Maximum sample mass 110 g
Readability 0.001 g
Measurement principle Loss on drying (weighing while heating)
Typical samples Grains, feeds, granules, soils, dried foods
Heater type, temperature range and data output Confirm at enquiry

Care & Handling

  • Clean the touch screen with a soft, slightly damp cloth, never with solvents, and avoid operating it with dusty gloves.
  • Spread samples evenly and keep them away from the edge of the pan, so spatter does not reach the heater.
  • Allow the touch screen moisture analyzer to cool before removing the pan holder or cleaning inside.
  • Keep the instrument out of draughts and direct sunlight, which affect both heating and weighing.

Why Choose LabEquip

Grain stores, feed mills, food plants and teaching laboratories in agriculture and food technology choose a 110 g analyzer where samples are coarse or uneven. LabEquip lists it in its physics equipment range. Ask about drying programs and data output through the contact page.

Frequently Asked Questions

Should I choose the 110 g or the 60 g moisture analyzer?

Choose 110 g at 0.001 g for coarse or uneven materials, where a larger sample is more representative. Choose 60 g at 0.1 mg for small, uniform samples such as pharmaceutical powders, where finer weighing matters more than sample size.

How is a drying method set up?

Compare the analyzer’s result with a reference oven method on the same material, then adjust the temperature and switch-off criterion until the results agree in the shortest time without scorching. Record the settings as the method for that product.

What is a switch-off criterion?

It is the condition that ends the test, usually when the mass loss per time interval falls below a set value, or after a fixed time. A stricter criterion gives a more complete result but takes longer.

Why should the sample be spread thinly?

A thin layer heats evenly and lets water escape from all of the sample at once. A thick layer dries slowly from the top, and the result then depends on how long the test runs.

Can the analyzer test liquids?

Many liquid samples can be dried if spread on a glass-fibre filter pad on the sample pan, which increases the surface area and prevents spattering and skin formation.

What makes results come out too high?

Scorching or decomposition adds the mass of escaping gases to the moisture result. Lower the drying temperature if the sample darkens, and check that it does not contain solvents or other volatile substances.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)