Quick Answer: The Meyer’s Viscosity Apparatus is an oscillating-disc instrument for finding the viscosity of a liquid: a flat disc hangs horizontally from a torsion wire and swings to and fro in the liquid, and the rate at which the swings die away is measured. The method is the oscillating-disc method associated with the German physicist O. E. Meyer.
Damping by a Viscous Liquid
When the disc is twisted and released, the torsion wire makes it oscillate about its vertical axis. In air the swings die away slowly; in a liquid, viscous drag on the faces of the disc removes energy at every swing and the amplitude falls faster. The ratio of successive amplitudes stays constant, so the damping is described by the logarithmic decrement, the natural logarithm of that ratio.
In the usual set-up, amplitudes are read with a lamp and scale: a mirror on the suspension reflects a spot of light onto a scale, so small angular movements become easily measured displacements. The decrement is found in air and in the liquid, and in some procedures with the disc at different positions in the liquid, so that the damping due to the liquid on the disc faces can be separated from other losses. The viscosity then follows from the decrements, the period and the dimensions of the disc.
This approach differs from falling-ball tests such as the viscosity measurement tube, which suit thick liquids like glycerine, and from capillary-flow methods. The oscillating disc works for liquids of low viscosity such as water. The disc size, suspension wire and accessories with this listing are not stated in the title.
Experiments
- Determining the coefficient of viscosity of water and dilute solutions
- Teaching damped oscillations and logarithmic decrement with real data
- Comparing the viscosities of two low-viscosity liquids
- Studying how viscosity falls as a liquid is warmed, where temperature control is available
Specifications
| Method | Oscillating disc (Meyer’s method) |
| Moving part | Horizontal disc on a torsion wire |
| Quantities measured | Period and logarithmic decrement, in air and in liquid |
| Reading | Mirror, lamp and scale in the usual set-up |
| Disc size and accessories | Confirm at enquiry |
Care & Handling
- Never kink or twist the suspension wire beyond a small angle; a damaged wire changes the period.
- Level the stand so that the disc hangs horizontal and centred in its vessel.
- Release the disc gently with a small amplitude.
- Rinse and dry the disc after use, and store it with the wire unloaded where possible.
Why Choose LabEquip
College physics laboratories buy this apparatus for the viscosity practical on water, where the oscillating disc gives a result that capillary and falling-ball methods find hard. LabEquip lists it in Physics Equipments; confirm disc size and accessories through our contact page.
Frequently Asked Questions
Does temperature affect the result?
Yes. The viscosity of most liquids falls noticeably as the temperature rises, so record the liquid temperature with every run and keep the apparatus away from heaters and direct sunlight.
What is logarithmic decrement?
It is the natural logarithm of the ratio of two successive amplitudes of a damped oscillation. Because the ratio stays constant from swing to swing, the decrement is a single number describing how strongly the motion is damped.
Why measure the decrement in air as well as in the liquid?
Some damping comes from the wire itself and from the air. Measuring in air first and subtracting it isolates the extra damping caused by the liquid, which is the part that depends on its viscosity.
Which liquids suit the oscillating disc method?
Liquids of low viscosity, such as water and dilute solutions, where falling-ball and capillary methods are less convenient. Very viscous liquids damp the disc so strongly that only one or two swings can be measured.
Why should the amplitude be kept small?
The theory assumes slow, smooth flow of the liquid around the disc. Large swings stir the liquid, create eddies and give a decrement that is too high. Small amplitudes also protect the torsion wire.
How is the period of oscillation measured?
Time a number of complete oscillations with a stopwatch, watching the light spot cross a fixed mark on the scale, and divide by the number counted. Timing many swings reduces the effect of reaction time.
Last Updated: October 2026










Reviews
There are no reviews yet.