Quick Answer: The Masses (Weights), Slotted in Rack are slotted masses supplied with a storage rack that holds the discs upright and sorted on the bench. Slotted masses in rack form suit practical classes where several groups load springs, wires and beams and every disc needs to come back to its place.
Loading a Cantilever
A metre rule or strip of wood clamped firmly to the bench edge, with most of its length projecting, makes a cantilever. A mass hanger is hung near the free end and slotted masses are added one at a time. After each addition the depression of the free end is read against a vertical scale, or with a pointer and travelling microscope for stiffer strips.
Plotting depression against load gives a straight line for small loads, showing that the beam obeys a Hooke’s law of its own. Changing the projecting length while keeping the load fixed reveals a much stronger effect: depression grows with the cube of the length, which is why long shelves sag so much more than short ones. The gradient of the load graph, together with the beam’s dimensions, leads in advanced courses to the Young’s modulus of the material.
Why the Rack Matters
Slotted masses are small, similar and easy to lose. A rack keeps each disc upright on its peg or in its slot, sorted by value, so students can see at a glance what is available and the teacher can see at the end of the lesson what is missing. Discs kept loose in a drawer get knocked, mixed with other sets and chipped, which slowly changes their mass.
Experiments
- Cantilever and beam-bending practicals
- Hooke’s law and spring-constant experiments
- Sonometer and string-tension work
- Class practicals where several groups share one well-organised set
Specifications
| Type | Slotted masses with storage rack |
| Form | Discs with a radial slot for a hanger stem |
| Storage | Rack holding the discs upright and sorted |
| Typical companions | Mass hanger, clamp, metre rule, spring, cantilever setup |
| Material, masses included and hanger supply | Confirm at enquiry |
Care & Handling
- Return each disc to its place in the rack straight after use.
- Stand the rack of slotted masses on a flat bench away from the edge, as a loaded rack is heavier than it looks.
- Keep hands and feet clear below a loaded cantilever and add discs gently.
- Wipe the discs and rack clean and dry before storing them.
Why Choose LabEquip
Schools and colleges buy racked sets for shared practical benches, where tidy storage saves time and prevents losses. LabEquip supplies them from its Physics Equipments range; for a dedicated beam setup see the cantilever apparatus. Requests for quantity and hanger options can be sent through the contact page.
Frequently Asked Questions
What is the advantage of slotted masses in a rack?
The rack keeps every disc upright and sorted by value, so groups can find what they need quickly and the set stays complete. Masses stored loose tend to get mixed up, knocked and lost.
How does a cantilever bend under load?
For small loads the depression of the free end is proportional to the load. It also depends very strongly on the projecting length, rising with its cube, and on the stiffness of the material and the shape of its cross-section.
Why does a longer cantilever sag so much more?
A longer beam gives the load a bigger turning effect at the clamp and has more length over which to bend. The two effects combine, so doubling the length increases the depression about eight times.
Can these masses be used for Young’s modulus experiments?
Yes. They provide the stepped loads for cantilever methods and for Searle’s wire method. In the wire method, loading and unloading readings are compared to check that the wire stayed elastic.
How should discs be added to a hanger?
One at a time, lowering each onto the stack gently and turning its slot opposite to the one below. Waiting a few seconds before reading lets oscillations die away.
Is a hanger included with the rack?
Racked sets are often supplied with a hanger, but the exact contents of this set should be confirmed when you enquire. The hanger’s own mass must always be added to the load it carries.
Last Updated: October 2026










Reviews
There are no reviews yet.