Quick Answer: The Masses (Weights) Set, Steel, Hooked, Chrome Plated is a set of steel masses, each with its own hook, finished with bright chrome plating. Every piece in the hooked masses set can hang directly from a spring balance, string or clamp without a separate hanger.
Checking a Spring Balance
Spring balances and newton meters drift as their springs age, and a set of hooked masses is the quickest way to test them. Each mass is hung in turn from the balance hook and the reading compared with the expected weight: the nominal mass in kilograms multiplied by g. Plotting reading against expected value across the set shows whether the balance has a zero error, which shifts every reading by the same amount, or a scale error, which grows with load. A zero error can usually be adjusted out; a scale error means the spring itself has changed.
Does Mass Change a Pendulum’s Period?
Hooked masses make a convenient pendulum bob, because the string ties straight onto the hook. Keeping the length fixed and changing only the mass, students time twenty swings for each piece and find that the period hardly changes. The result surprises many learners and leads to the formula T = 2π√(l/g), in which mass does not appear. The length must be measured to the centre of mass of each piece, which shifts as larger, taller masses are used, so careful students adjust the string to keep l constant.
Steel with a Chrome Finish
Steel gives a compact, strong mass and a hook that will not bend under normal loads, while chrome plating protects the surface from rust and keeps it easy to wipe clean. Steel is attracted to magnets, so these masses are not chosen for experiments around compasses or magnetic fields.
Applications
- Checking spring balances and newton meters for zero and scale errors
- Pendulum experiments showing that period does not depend on bob mass
- Hanging loads on levers, pulleys and force tables
- Demonstrating weight and the relation W = mg
Specifications
| Set type | Hooked masses |
| Material | Steel |
| Finish | Chrome plated |
| Fitting | Integral hook on each piece |
| Masses in the set and storage box | Confirm at enquiry |
Care & Handling
- Hang hooked masses gently; a load dropped onto a spring balance can overstretch its spring.
- Wipe the chrome-plated surfaces dry after use, because steel exposed through scratched plating can rust.
- Keep the set away from strong magnets, which can magnetise steel.
- Never use the hooks to lever or pry; a bent hook changes how the mass hangs.
Why Choose LabEquip
Schools buy hooked sets for quick, hanger-free loading in force and pendulum practicals. LabEquip lists this chrome-plated version in its Physics Equipments range, with a painted steel hooked masses set as the more economical alternative and pendulum bobs for dedicated period work. Discuss quantities through the contact page.
Frequently Asked Questions
How do I check a spring balance with hooked masses?
Hang each mass in turn and compare the reading with its expected weight, mass times g. If every reading is off by the same amount there is a zero error; if the error grows with load, the spring itself has changed.
Does the mass of a pendulum bob affect its period?
For a simple pendulum with small swings, no. The period depends on length and gravitational field strength only. Hooked masses let students test this directly by changing the mass while keeping the length the same.
What does chrome plating add?
A hard, bright, corrosion-resistant layer over the steel, which keeps the masses rust-free with ordinary care. Plating that is scratched through leaves the steel exposed, so the pieces should not be dropped or scraped against each other.
Can these masses be used near magnets?
It is better not to. Steel is attracted to magnets and can become slightly magnetised, which would add unwanted forces in magnetism experiments. Brass or plastic masses are used in those cases.
What is the difference between hooked and slotted masses?
A hooked mass hangs by itself from its hook, which makes it quick to use as a single load or pendulum bob. Slotted masses stack on a hanger, which suits experiments that add many equal steps.
How should the masses be stored?
In their box or on a rack, sorted by size, in a dry cupboard. Keeping them together makes missing pieces obvious and stops them knocking against each other.
Last Updated: October 2026










Reviews
There are no reviews yet.