Quick Answer: The Masses (Weights), Hooked, Double sided, Fixed, Brass are brass masses with a fixed hook at each end, so one mass can hang from another. Double sided hooked masses let students build a vertical chain of loads in series, adding or removing masses without a separate hanger.
Tension Down a Hanging Chain
Hang three or four double-sided masses one below another from a spring balance, and a simple question becomes a good test of understanding: what is the tension at each joint? Each hook carries the weight of everything hanging below it. The top hook carries the whole chain, the next carries everything except the top mass, and the lowest hook carries only the last mass.
Students can test this by inserting a second, small spring balance at different joints. The readings fall in steps, each equal to the weight of one mass. The same idea explains the tension in a lift cable, in a climbing rope shared by several climbers and in the links of a crane chain.
Loading in Series
Because each mass has a hook below as well as above, loads can be added to a spring, wire or lever arm one at a time by hooking each new mass onto the bottom of the last. This is a handy alternative to slotted masses on a hanger, especially where a hanger would be too tall for the space below a spring. Fixed hooks are part of the body, so they cannot loosen or swivel off during an experiment.
Applications
- Investigating tension at different points along a hanging chain of masses
- Stepwise loading of springs for Hooke’s law and spring-constant work
- Hanging loads at chosen points on levers and metre rules
- Building pendulum bobs of different total mass
Specifications
| Type | Hooked masses, double sided |
| Material | Brass |
| Hooks | Fixed, one at each end |
| Use | Chaining masses in series below a spring, balance or lever |
| Masses in the set and box | Confirm at enquiry |
Care & Handling
- Check that each hook is fully engaged before letting go of the next double sided hooked mass in a chain.
- Keep chains short enough that the lowest mass hangs clear of the bench and cannot swing into apparatus.
- Do not bend the hooks open to fit thicker supports; use a loop of string instead.
- Wipe and dry the brass after use and store the masses in their box.
Why Choose LabEquip
Teachers who want quick, hanger-free loading for springs and chains choose double-sided hooked masses. LabEquip lists them in its mechanics lab equipment range, alongside the single-hook hooked brass masses and a version with recessed sliding hooks. Quantities can be requested via the contact page.
Frequently Asked Questions
What does double sided mean for a hooked mass?
It has a hook at both ends. The upper hook hangs the mass from a support and the lower one carries the next mass, so several can be chained in series.
Is the tension the same all along a chain of masses?
No. Each joint supports the weight of everything below it, so tension is greatest at the top and falls in steps of one mass’s weight toward the bottom.
Why choose fixed rather than sliding hooks?
Fixed hooks are part of the mass and cannot loosen or slide out during an experiment, which makes them robust for repeated class use. Sliding hooks suit masses that also need to stand flat on a balance pan.
Can these masses be used on a balance pan?
They can lie on their side on a pan, but with a hook at each end they do not stand upright. For regular pan weighing, knobbed masses are easier to place and lift.
How many masses can be chained?
As many as the top support and the spring or balance can carry and the height below allows. In practice a few masses keep the chain short, steady and easy to read.
Do chained masses swing more than slotted masses on a hanger?
A chain has several joints, so it can sway or twist if disturbed. Adding masses gently and letting the chain settle before reading avoids this; for experiments needing many small steps, slotted masses on a hanger stay more compact.
Last Updated: October 2026










Reviews
There are no reviews yet.