Quick Answer: The Masses (Weights), Hooked, Double sided, Recessed with Sliding Hook, Brass are brass masses whose hook slides within a recess in the body, so each piece can hang as a load or stand flat on a surface. Sliding hook brass masses work equally on balance pans and on levers, metre rules and springs.
Finding the Mass of a Metre Rule by Moments
A classic practical uses one known mass and a metre rule to find the mass of the rule itself. The rule is first balanced on a knife-edge on its own to locate its centre of gravity, close to the 50 cm mark. One of the brass masses is then hung near one end, and the knife-edge is moved toward that end until the rule balances again.
At balance the clockwise and anticlockwise moments about the knife-edge are equal. The known mass multiplied by its distance from the knife-edge equals the mass of the rule multiplied by the distance from the knife-edge to the rule’s centre of gravity. Measuring both distances gives the rule’s mass, which can then be checked on a balance. Repeating with a different known mass shows how consistent the method is.
One Mass, Two Ways of Using It
A hook that slides back into a recess solves a small practical problem. A projecting fixed hook stops a mass standing upright on a pan or bench. With the hook drawn in, the mass presents a flat face and can be placed on a balance pan, a trolley or a lever plate; with the hook pulled out, it hangs from a string loop, a spring or another mass. One set therefore covers both hanging and standing loads.
Applications
- Finding the mass of a metre rule by the principle of moments
- Hanging loads from springs, levers and strings
- Standing loads on balance pans and trolleys
- Chaining masses below a spring for stepwise loading
Specifications
| Type | Hooked masses, double sided |
| Material | Brass |
| Hook | Sliding hook that withdraws into a recess |
| Use | Hanging or standing loads |
| Hook layout, masses in the set and box | Confirm at enquiry |
Care & Handling
- Slide the hook fully out and check it is seated before hanging a load from the sliding hook brass masses.
- Keep grit out of the recess so the hook slides freely; a dry brush is enough to clean it.
- Do not force a stuck hook with pliers, because a bent hook will no longer withdraw.
- Store the masses with hooks withdrawn so they cannot catch on other pieces.
Why Choose LabEquip
Schools that want one set of masses for both hanging and pan use pick the sliding-hook design. LabEquip lists it in its Physics Equipments range, and the hard wood metre rule completes the moments practical. Ask for quantities via the contact page.
Frequently Asked Questions
Why have a hook that slides into a recess?
So that each mass can be used two ways. With the hook out it hangs from a support or another mass; with the hook withdrawn it stands flat on a balance pan or trolley without toppling.
How do I find the mass of a metre rule with one known mass?
Find the rule’s balance point alone, then hang the known mass near one end and move the knife-edge until the rule balances again. Equate moments about the knife-edge: known mass times its distance equals rule mass times the distance to the rule’s centre of gravity.
Why find the rule’s balance point first?
The whole weight of the rule acts at its centre of gravity, which may not be exactly at the 50 cm mark. Locating it first gives the correct distance for the moment calculation.
How accurate is the moments method?
With careful balancing and distances read to the millimetre, results usually agree with a balance to within a few percent. Friction at the knife-edge and the width of the hanging loop are the main sources of error.
Can the masses be chained together?
Yes, where both ends carry a hook or eye. Each mass can then hang below another, which is useful for adding loads in steps below a spring.
Why brass for masses that hang near apparatus?
Brass resists rust and is not magnetic, so it can hang near magnets, compasses or steel stands without being attracted or adding unwanted forces.
Last Updated: October 2026










Reviews
There are no reviews yet.