Search

In Stock

Masses (Weights), Fractional

Non-Magnetic Material Composition: Manufactured from high-grade aluminum and German silver alloys to minimize magnetic susceptibility and prevent electromagnetic interference during sensitive milligram-level weighing procedures.

Geometric Denomination Architecture: Features a standardized plate or wire design with distinct upturned edges to facilitate secure forceps handling, ensuring rapid identification and preventing microscopic mass drift caused by surface abrasion.

$7.33

Quick Answer: The Masses (Weights), Fractional are small sub-gram weights used to finish a weighing after the gram weights have brought a balance close to equilibrium. Fractional weights are thin flat pieces, picked up only with forceps, that let masses be found to a fraction of a gram on physical and analytical balances.

Completing a Weighing

Weighing on a beam balance works from the largest weight downward. Gram weights bring the balance close; the small pieces then add the remaining tenths and hundredths of a gram until the pointer returns to its resting point. Without them, the last part of the mass would have to be estimated from the pointer, or the result rounded to the nearest gram.

These pieces are usually thin metal sheets with one edge turned up so that forceps can grip them, with the value stamped on the surface. In many sets their shapes also differ by value, which helps students tell similar-looking pieces apart. Because they are so light, a draught, a drop of moisture or a little static charge can matter, so they are always lifted with forceps and placed carefully on the pan.

A Practical: How Thick Is Kitchen Foil?

Small weights make a neat practical possible. Students cut a rectangle of aluminium foil, measure its length and breadth with a ruler, and find its mass on a physical balance, using the sub-gram pieces for the final part of the reading. Dividing mass by the known density of aluminium gives the volume, and dividing volume by area gives the thickness. The result, far smaller than any ruler can show, demonstrates how weighing can reach dimensions that direct measurement cannot.

Applications

  • Completing weighings to a fraction of a gram on physical balances
  • Fine adjustments on two-pan analytical balances
  • Finding the sensitivity of a balance by adding a small known mass
  • Indirect measurement practicals such as foil thickness or the mass of a single sheet of paper

Specifications

Type Fractional (sub-gram) weights
Form Thin pieces with a raised edge for forceps
Marking Value stamped on each piece
Used with Physical and analytical balances
Values included, material and case Confirm at enquiry

Care & Handling

  • Handle fractional weights only with forceps; the moisture from fingers is significant at this scale.
  • Work over the bench, not over a gap or sink, because small pieces are easily lost.
  • Keep each piece flat in its own compartment; bending one changes its fit and invites damage.
  • Close the balance case and avoid breathing on the pan when using the smallest pieces.

Why Choose LabEquip

Physics and chemistry departments add fractional pieces to balances that need finer readings than their gram weights can give. LabEquip lists them in its Physics Equipments range, and they complete sets such as the physical weights set. Ask about values and quantities through the contact page.

Frequently Asked Questions

What are fractional weights used for?

They complete a weighing after the gram weights have been chosen, adding the remaining fraction of a gram. They are also used to measure a balance’s sensitivity, by noting how far a small known mass moves the pointer.

Why do the pieces have a bent edge?

The raised edge lets forceps pick up a thin, flat piece without sliding it across the bench or touching its face. It also stops the piece lying perfectly flat, so it is easy to lift.

How can I tell similar pieces apart?

Read the value stamped on each one. Many sets also use different shapes for different values, and keeping each piece in its own compartment of the case makes mix-ups unlikely.

Why must small weights never be touched by hand?

At this mass, the moisture and oil from a fingertip are a measurable part of the weight. Fingers also bend thin sheets easily. Forceps keep the pieces clean and flat.

How is foil thickness found by weighing?

Measure the area of a rectangle of foil, find its mass on a balance and divide mass by density to get the volume. Thickness is volume divided by area. The method works because mass can be measured far more precisely than such a small thickness.

Can a draught really affect such a light weight?

Yes. On a sensitive balance even gentle air movement pushes the pan more than a small piece weighs. That is why the balance case is closed and readings are taken with the air still.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)