Search

In Stock

Magnetic levitation balance

Balancier sur support magnétique, Low-Friction Fulcrum Bearing Supports the Evaluation of micro-adjustments in mass distribution, ensuring high-fidelity results during undergraduate statics trials.

Factory-Calibrated Zero-Point Slider Teaches the Synthesis of measurement accuracy by allowing students to neutralize beam mass before force application.

₹1,005.00

Quick Answer: The lever balance on magnetic support is a straight beam pivoted at its centre on a low-friction axis, with holes at equal spacing along its length, held on a vertical steel board by a magnetic mount. The lever balance on magnetic support is used to investigate the law of moments with hanging masses and force meters.

Counting Holes Instead of Measuring

Because the holes are evenly spaced, distances from the pivot can be counted in hole spacings rather than measured. Two equal masses hung three holes to the left balance three of the same masses two holes to the right, since 2 × 3 = 3 × 2. Students find many balancing patterns quickly and spot the rule themselves: the sum of load × distance on one side equals that on the other.

Converting to real units comes afterwards. Multiplying the hole count by the spacing gives the distance in metres, and multiplying the mass by g gives the force, so the moments come out in newton metres.

Forces on the Same Side and an Unknown Mass

A force meter hooked to the beam and pulling upward can balance a hanging mass on the same side of the pivot, which surprises students who expect balancing loads always to sit on opposite sides. The upward pull and the downward load turn the beam in opposite directions, so their moments still cancel.

The lever balance also finds an unknown mass. Hang it at one hole, balance it with known masses at another, and the unknown equals the known mass multiplied by the ratio of their distances. Checking the answer on a balance closes the loop.

Investigations

  • Verifying the law of moments with parallel forces
  • Finding balancing patterns by counting hole spacings
  • Balancing a load with an upward force on the same side of the pivot
  • Determining an unknown mass by moments

Specifications

Product Lever (moments) balance on a magnetic support
Pivot Central low-friction axis
Beam Holes at equal spacing for hanging masses or attaching force meters
Mounting Magnetic, for vertical steel boards
Beam length and hole spacing Confirm at enquiry

Care & Handling

  • Check the empty beam rests level and turns freely before every practical
  • Hang masses gently and steady the beam while loading so it does not swing hard
  • Keep the axis free of dust and avoid bending the beam with heavy loads
  • Store flat, with the magnetic mount away from steel filings and compasses

Why Choose LabEquip

This balance suits schools and colleges that teach the law of moments on a vertical board, where the beam stays in view of the whole class. LabEquip pairs it with masses marked in newtons and the moments disc for angled forces, plus other physics lab equipment; ask LabEquip for board sets.

Frequently Asked Questions

How do the evenly spaced holes help?

Distances can be counted in hole spacings, so students can find balancing arrangements quickly and see the pattern before converting to metres and newtons.

How is an unknown mass found with the balance?

Hang the unknown at one hole and balance it with known masses at another. The unknown mass equals the known mass multiplied by the known distance divided by the unknown’s distance.

Can a force meter be used on the same side as the load?

Yes. A force meter pulling upward on the same side as a hanging mass turns the beam the opposite way, so it can balance the load. Its moment is its reading times its distance from the pivot.

Why must the beam balance before loading?

If the empty beam is not level, its own weight already produces a moment. That extra moment is added to one side and spoils every result.

Why does the beam sometimes settle at a slight tilt?

Friction at the pivot can stop the beam before it is exactly level, and a beam whose centre of gravity is not exactly at the pivot settles at an angle. Tap the board gently and check the empty beam.

How does this differ from a moments disc?

The beam is designed for parallel forces at known distances along a line. A moments disc takes forces from any direction, which is better for showing the role of the perpendicular distance.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)