Search

In Stock

Magdeburg Hemisphere

Heavy-Duty Cast Construction: Manufactured from high-tensile cast metal with precision-ground mating surfaces and a high-integrity rubber gasket to ensure an airtight seal under deep vacuum conditions.

Integrated Vacuum Stopcock: Features a durable brass valve with a serrated hose connector, allowing for secure attachment to manual or motorized vacuum pumps and immediate pressure isolation via the 90-degree lever.

$7.61

Quick Answer: The Magdeburg Hemisphere apparatus is a pair of hollow metal hemispheres with closely fitting rims and a valve, used to demonstrate the force of atmospheric pressure. When the air is pumped out of the sphere they form, the outside air presses the halves together so firmly that pulling them apart takes a large effort.

Von Guericke’s Demonstration in the Classroom

In the seventeenth century Otto von Guericke, mayor of Magdeburg, fitted two large copper hemispheres together, pumped out the air with a pump of his own design and showed that teams of horses could not pull them apart. The classroom Magdeburg hemisphere set repeats the experiment on a hand-held scale. The rims are greased or fitted with a seal, the halves pressed together, and air is drawn out through a tap on one half with an air pump.

Once evacuated, the halves are held together by the difference between atmospheric pressure outside and the low pressure inside. The force needed to separate them is that pressure difference multiplied by the cross-sectional area of the sphere, πr², not its curved surface area, because only the components of the pressure along the line of pull add up. A sphere twice as wide needs four times the force, which explains why von Guericke’s large hemispheres defeated the horses.

Opening the tap lets air back in, and the halves part at once, a vivid end to the demonstration. The set is evacuated with an exhaust pump such as our air pump with aluminium plate, connected through thick-walled tubing. The diameter, metal, seal type and valve fitting are not given in the title; the lift pump is a natural follow-on lesson on atmospheric pressure.

Specifications

Demonstration Force of atmospheric pressure
Construction Matched hollow hemispheres with sealing rims and a valve
Used with Air exhaust pump and thick-walled vacuum tubing
Holding force Pressure difference × πr²
Diameter, material and parts supplied Confirm at enquiry

Demonstrations

  • Demonstrating atmospheric pressure in middle and secondary school
  • Telling the story of von Guericke’s experiment and the invention of the air pump
  • Estimating the separating force from the sphere’s radius and the pressure difference
  • Showing that the halves part immediately when air is let back in

Care & Handling

  • Clean the rims and apply a thin layer of vacuum grease before each use.
  • Close the valve fully before disconnecting the pump tube.
  • Pull straight apart along the axis; twisting or prying can damage the rims.
  • Never knock the rims together, since a dent or burr stops them sealing.
  • Wipe off grease and store the halves with their rims protected.

Why Choose LabEquip

Teachers choose Magdeburg hemispheres because students can try, and fail, to pull them apart themselves, which makes atmospheric pressure unforgettable. They are part of our Physics Equipments; contact LabEquip to confirm the size and fittings.

Frequently Asked Questions

What holds the Magdeburg hemispheres together?

Atmospheric pressure. With the air removed from inside, nothing pushes outward to balance the air pressing on the outside, so the halves are forced together.

How large is the force needed to pull them apart?

It equals the difference between outside and inside pressure multiplied by the area of a circle with the same radius as the sphere. Larger hemispheres need much greater force, because that area grows with the square of the radius.

Why is grease applied to the rims?

The rims never meet perfectly. A thin film of vacuum grease fills the tiny gaps so that air cannot leak back in after the sphere is evacuated.

What pump is needed?

Any exhaust pump that can lower the pressure inside the sphere, such as a hand-operated or motor-driven school vacuum pump, connected to the valve with thick-walled tubing that will not collapse.

Why do the halves fall apart when the tap is opened?

Air rushes back in and the pressure inside becomes equal to the pressure outside. With no pressure difference left, there is no force holding the halves together.

Who first performed this experiment?

Otto von Guericke, the mayor of Magdeburg in Germany, in the seventeenth century. He used it to show the power of the vacuum pump he had invented and the strength of air pressure.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)