Search

In Stock

Lever Stick

High-Precision Metric Graduations: Features a kiln-dried, warp-resistant hardwood or anodized aluminum body with sharp, permanent screen-printed millimeter and centimeter markings to ensure sub-millimeter reading accuracy during sensitive torque equilibrium experiments.

Multi-Point Pivot Architecture: Engineered with a precision-drilled central fulcrum and equidistant suspension holes, allowing for the integration of low-friction knife-edge clamps and calibrated mass hangers for complex multi-force rotational analysis.

₹980.00

Quick Answer: The Lever Stick is a straight bar used as a model lever in school mechanics: a pivot, a load and an effort are placed at chosen points along it to build first, second and third class levers. With a lever stick, students see how the position of the fulcrum changes the effort needed and test the principle of moments.

Three Classes of Lever from One Bar

Every lever has three parts: a fulcrum about which it turns, a load to be moved and an effort applied to move it. The class of lever depends only on their order along the bar. With the fulcrum between effort and load, as in a seesaw or crowbar, the stick is a first class lever. With the load between fulcrum and effort, as in a wheelbarrow or nutcracker, it is second class. With the effort in the middle, as in tweezers or the human forearm, it is third class.

Because the three points can be moved along one bar, a single stick lets a class build all three and compare them. Second class levers always need less effort than the load, since the effort arm is longer than the load arm. Third class levers always need more effort than the load but move it further and faster, which is why they are common in the body and in tools that need speed or delicacy rather than force.

Measured forces turn this into a quantitative experiment. Hanging a known load and pulling with a spring balance at different points shows that, at balance, effort multiplied by effort arm equals load multiplied by load arm, provided the stick is pivoted at its own centre of gravity so that its weight adds no turning effect.

Classroom Activities

  • Building first, second and third class levers and naming everyday examples of each
  • Measuring effort with a spring balance as the fulcrum is moved closer to the load
  • Calculating mechanical advantage as load divided by effort for each arrangement
  • Finding the centre of gravity of the stick by balancing it on a knife edge or pencil
  • Showing that a lever trades force for distance: the end that moves less exerts more force

Specifications

Item Straight bar used as a model lever
Classes demonstrated First, second and third class levers
Principle Principle of moments: effort × effort arm = load × load arm at balance
Measured with Spring balance, slotted masses and a ruler
Material, length and pivot fittings Confirm at enquiry

Care & Handling

  • Keep the lever stick straight; store it flat or hung rather than leaning in a corner where it can bow.
  • Do not load it beyond what it carries without visible bending, because a bent bar shifts the centre of gravity and spoils balance readings.
  • Check that the pivot turns freely, as a stiff pivot hides small differences in moment.
  • Wipe off grease and pencil marks so the scale or hole markings stay readable.

Why Choose LabEquip

Primary and middle school science teachers use the lever stick to introduce simple machines before moving on to measured moments. For quantitative work, the lever and force arm apparatus adds a stand and measured arms, and both are listed with LabEquip’s mechanics lab equipment. Class quantities can be requested through the contact page.

Frequently Asked Questions

What are the three classes of lever?

They are defined by what sits in the middle. A first class lever has the fulcrum in the middle, a second class lever has the load in the middle and a third class lever has the effort in the middle. The stick can be set up as any of the three.

Which class of lever gives the biggest mechanical advantage?

A second class lever always has a mechanical advantage greater than one, because the effort arm is longer than the load arm. A first class lever can be greater or less than one depending on where the fulcrum sits, and a third class lever is always less than one.

Why would anyone use a third class lever?

It needs more effort than the load, but the load end moves further and faster than the effort. That suits tweezers, fishing rods and the forearm, where speed, reach or fine control matter more than force.

Why should the stick be pivoted at its centre?

Pivoting at the centre of gravity means the bar’s own weight acts through the fulcrum and produces no moment. If the pivot is elsewhere, the bar’s weight must be included as an extra force acting at its centre of gravity.

How is the effort measured?

Hook a spring balance onto the stick at the effort point and pull at right angles to the bar. Reading the balance when the stick is level gives the effort in newtons. A slanted pull gives a larger reading, since only part of it turns the stick.

Can the stick find an unknown mass?

Yes. Balance the unknown on one side of the fulcrum against a known mass on the other, measure both distances and use the principle of moments: the unknown mass equals the known mass multiplied by its distance, divided by the unknown’s distance.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)