Quick Answer: The Kundt tube with analog outputs is a modern form of Kundt’s classic tube: sound from a loudspeaker forms standing waves inside a tube, and instead of watching powder settle at the nodes, a microphone and its electronics send voltage signals to an oscilloscope, meter or data logger. It is used to measure wavelength and the speed of sound.
From Powder Heaps to Voltage Signals
August Kundt’s experiment of 1866 sprinkled fine powder along a glass tube; when sound resonated inside, the powder gathered into small heaps at the displacement nodes, and the spacing between heaps was half a wavelength. The method is striking but slow to reset and hard to read precisely, because the heaps have soft edges.
The analog-output version keeps the tube and the standing wave but reads them electrically. A microphone moves along the axis of the tube and its signal is brought out on sockets as a voltage, so the sound pressure at each position can be recorded rather than judged by eye. Designs of this type can also provide a voltage for the microphone position and a smoothed envelope of the sound signal; which outputs this unit offers should be checked before planning a data-logged lesson.
Specifications
| Product | Kundt’s tube with analog signal outputs |
| Principle | Standing sound waves in an air column |
| Detection | Microphone moved along the tube |
| Outputs | Analog voltage signals for an oscilloscope, meter or data logger |
| Sound source | Loudspeaker driven by a signal generator |
| Output details, tube size and supply | Confirm at enquiry |
A Data-Logged Kundt Tube Practical
With the microphone signal and its position logged together, one slow pass along the tube draws the standing-wave pattern directly as a graph of amplitude against distance. Minima mark the pressure nodes, and the distance between alternate minima is one full wavelength. Repeating the pass at several generator frequencies shows the pattern compressing as the frequency rises, and v = fλ gives the speed of sound for each run.
Where the end of the tube can be opened or closed, comparing the two is a useful extension. At a closed end the air cannot move, giving a pressure antinode, while at an open end the pressure stays near atmospheric, giving a pressure node. The logged graphs make that quarter-wavelength shift easy to see and can be exported to a spreadsheet for analysis.
Where the Kundt Tube Is Used
- Measuring the speed of sound in air with logged data
- Plotting the standing-wave pattern of sound pressure along a tube
- Comparing reflection at closed and open ends
- Teaching sensor outputs and signal envelopes in instrumentation courses
Care & Handling
- Connect the outputs only to the inputs of an oscilloscope, meter or interface, never to a supply
- Move the microphone slowly, especially when logging, so the readings keep pace with the position
- Keep the generator output moderate so the loudspeaker is not overdriven
- Clean the tube with a soft cloth only, as abrasive cleaners scratch transparent tubes
Why Choose LabEquip
College physics labs and senior schools with data-logging interfaces buy this Kundt tube to replace powder-based measurements with recorded data. LabEquip offers it next to the simpler sound wave study bench within its physics lab equipment range. Tell us which interface you use via LabEquip contact.
Frequently Asked Questions
How is this Kundt tube different from the classic powder version?
The classic tube shows nodes as heaps of powder. This version measures the sound with a microphone and sends the result out as voltage signals, so the pattern can be recorded and analysed instead of judged by eye.
What can the analog outputs be connected to?
An oscilloscope, a digital meter or the voltage inputs of a data-logging interface. Match the voltage range of each output to the input you plan to use.
How do I find the wavelength from the logged graph?
Measure the distance between two minima that have one other minimum between them; that distance is a full wavelength. Using several minima and dividing improves accuracy.
Why does the pattern change when the end of the tube is opened?
A closed end reflects sound with a pressure maximum at the wall, while an open end reflects it with a pressure minimum. The whole standing-wave pattern shifts by a quarter wavelength.
What is a signal envelope?
It is a smoothed version of the microphone signal that follows its peak amplitude rather than every oscillation. Logging the envelope gives a clean curve of loudness against position.
Does the tube need a separate signal generator?
The loudspeaker is normally fed from an external signal generator so the frequency can be chosen and read. Tell us your generator model and we will confirm whether it is suitable.
Last Updated: October 2026










Reviews
There are no reviews yet.