Search

In Stock

Kater’s Reversible Pendulum

Hardened Alloy Steel Knife-Edges: Features two adjustable, precision-ground knife-edges mounted on a 1.2-meter stainless steel or brass rod, ensuring minimal rotational friction and stable pivot points for repeatable time-period measurements.

Bi-Material Calibration Masses: Equipped with precision-machined sliding weights—typically one heavy metallic mass and one light wooden or plastic mass—facilitating the fine adjustment required to achieve identical oscillation periods from both pivot orientations.

$6.11

Quick Answer: Kater’s Reversible Pendulum is a compound pendulum, a rigid bar with two knife edges facing each other and adjustable masses, that can swing from either edge. When the periods about both edges are made equal, the distance between the knife edges equals the length of the equivalent simple pendulum, so Kater’s reversible pendulum gives g without needing the centre of gravity or the moment of inertia.

The Principle Behind Kater’s Pendulum

Any rigid body swinging about a horizontal axis behaves like a simple pendulum of a certain equivalent length. For a compound pendulum this length is L = h + k²/h, where h is the distance from the pivot to the centre of gravity and k is the radius of gyration. Measuring L directly on an ordinary compound pendulum is difficult, because the centre of gravity of a bar carrying masses is hard to locate precisely.

Henry Kater’s solution, devised in the early nineteenth century, was to fit a second knife edge on the other side of the centre of gravity. For every pivot there is a conjugate point, the centre of oscillation, about which the period is the same, and the two lie exactly L apart. By sliding the adjustable masses until the periods about the two knife edges are equal, the experimenter places the edges at a pivot and its conjugate. L is then simply the distance between the edges, which can be measured with care, and g = 4π²L/T².

In practice the periods are brought close rather than exactly equal. Bessel showed that the result is still accurate if both periods T1 and T2 and the distances h1 and h2 of the edges from the centre of gravity are used: 8π²/g = (T1² + T2²)/(h1 + h2) + (T1² − T2²)/(h1 − h2). When the periods nearly match, the second term is small, so a rough value of h1 − h2 is enough.

Specifications

Type Reversible compound pendulum with two facing knife edges
Adjustment Movable masses on the bar to equalise the two periods
Measured Periods about each knife edge and the distance between the edges
Result g = 4π²L/T², or Bessel’s formula when the periods differ slightly
Bar length, masses and support bracket Confirm at enquiry

Uses in the Physics Laboratory

  • Determining the acceleration due to gravity at the laboratory site
  • Demonstrating that a pivot and its centre of oscillation are interchangeable
  • Plotting period against the position of a sliding mass to find where the two period curves cross
  • Comparing the result with a value from a simple pendulum to discuss sources of error

Care & Handling

  • Rest Kater’s pendulum on its knife edges only on a hard, level support plate, and never let the edges drop onto a bench.
  • Lock the sliding masses firmly before timing; a mass that creeps during a run changes the period.
  • Keep amplitudes small, a few degrees, so the swing stays close to simple harmonic and the two periods compare fairly.
  • Store the pendulum hung up or in a padded case, with the knife edges protected and lightly oiled against rust.

Why Choose LabEquip

College physics departments use Kater’s reversible pendulum for the classic measurement of g, usually with a digital stop watch or an electronic timer for long runs. It appears in LabEquip’s physics lab equipment list. Use the contact page to ask about the bracket and other accessories.

Frequently Asked Questions

Why is Kater’s pendulum more accurate than a simple pendulum?

A simple pendulum assumes a point mass on a weightless string, and its effective length is uncertain. Kater’s pendulum is a rigid body, and the length used in the calculation is the measured distance between two knife edges, which can be found precisely.

How do I find the position where the periods are equal?

Move one adjustable mass in steps and time the period about each knife edge at every position. Plot both periods against the mass position. The two curves cross at the setting where the periods are equal, and fine adjustment near that point gives the final reading.

Do I need to know where the centre of gravity is?

Only roughly. When the two periods are nearly equal, Bessel’s formula needs h1 − h2 only in a small correction term. Balancing the pendulum on a knife edge laid on the bench gives the centre of gravity closely enough.

How many swings should be timed?

Time fifty or more oscillations about each edge and repeat. Because g depends on the square of the period, a timing error has double the effect on the result, so long runs and careful counting pay off.

Does the amplitude affect the result?

Yes, slightly. The period of any pendulum grows with amplitude, so keep the swing to a few degrees and use the same amplitude about both edges. At small angles the correction is far smaller than typical timing errors.

What is the conjugate point of a pendulum?

For any pivot on a compound pendulum there is a point, the centre of oscillation, on the line through the centre of gravity, about which the period is identical. The distance between the pivot and this point equals the length of the equivalent simple pendulum.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)