Search

In Stock

Inertia Disc

Balanced CNC-Machined Geometry: Engineered from high-density metallic alloys to ensure uniform mass distribution and a perfectly centered axis, minimizing mechanical wobbling and parasitic vibrations during sensitive torsional experiments.

Standardized Suspension Interface: Features a precision-drilled central bore and integrated attachment points, allowing for seamless compatibility with bifilar pendulums and torsion wire assemblies for high-resolution period-of-oscillation measurements.

$7.04

Quick Answer: The Inertia Disc is a uniform disc used in rotational mechanics practicals as a body whose moment of inertia can be calculated from its mass and radius, ½MR² about its central axis. Students use the inertia disc to calibrate torsion set-ups, compare rotating bodies and test the theorems of moments of inertia.

Why a Uniform Disc Is Useful

Most bodies in a mechanics laboratory have shapes that make their moment of inertia awkward to calculate. A flat disc of even thickness is an exception. Weigh it, measure its diameter with vernier calipers, and the moment of inertia about the axis through its centre, perpendicular to its face, follows at once as I = ½MR². That makes the inertia disc a reference body: an object whose rotational inertia is known before the experiment starts.

In a torsion experiment the period of oscillation depends on both the moment of inertia of the hanging body and the stiffness of the wire. With an unknown body alone, neither can be found. Adding or swapping a disc of known I gives a second period, and the two periods together give both the torsional constant of the wire and the unknown inertia. The same idea underlies the inertia table and Maxwell’s needle, where known masses are added or rearranged.

The disc also shows how much the choice of axis matters. About a diameter, lying in its own plane, a thin disc has a moment of inertia of only ¼MR², half the value about its central axis. This is the perpendicular axis theorem: for a flat body, the moment about an axis perpendicular to it equals the sum of the moments about two perpendicular axes in its plane.

Specifications

Item Uniform disc for moment of inertia experiments
Moment of inertia, central axis ½MR², from the measured mass M and radius R
Moment of inertia, about a diameter ¼MR² for a thin disc
Typical use Reference body for torsional oscillation and rolling experiments
Material, diameter and mounting Confirm at enquiry

Practicals with the Disc

  • Finding the torsional constant of a suspension wire from the period of the disc
  • Determining an unknown moment of inertia by adding the disc and comparing periods
  • Testing the perpendicular axis theorem by oscillating the disc face-on and edge-on
  • Rolling the disc and a ring of equal mass down a slope to show that the disc arrives first
  • Checking the parallel axis theorem by placing the disc off-centre on an inertia table

Care & Handling

  • Keep the disc flat and free from dents; a bent rim or burr changes its mass distribution and spoils the calculated value.
  • Weigh the disc and measure its diameter at several points before the practical, and note the results on its storage box for later classes.
  • Store the disc lying on its face, away from heavy apparatus that could lean on it.
  • Wipe off fingerprints and keep it dry so the surface does not corrode.

Why Choose LabEquip

College and senior school physics departments use the inertia disc with torsion pendulums and the inertia table when teaching rotational dynamics, while the demonstration-style moment of inertia apparatus suits introductory lessons. Both are listed in LabEquip’s physics equipment range. Ask through the contact page about the disc’s material, size and mounting before ordering.

Frequently Asked Questions

How is the moment of inertia of the disc calculated?

Weigh the disc to get its mass M and measure the diameter in several directions with vernier calipers, then halve the mean to get R. About the axis through the centre and perpendicular to the face, I = ½MR². Use kilograms and metres to get the answer in kg m².

Why is the moment of inertia about a diameter smaller?

Mass in the disc lies, on average, closer to a diameter than to the central axis. For a thin disc the perpendicular axis theorem gives ¼MR² about any diameter, exactly half the value about the central axis.

Does a hole in the middle change the calculation?

Only slightly, because mass near the axis contributes little. For accurate work treat the body as an annulus, or subtract ½mr² for the missing central portion, estimating its mass m from the hole’s share of the disc’s area.

Which reaches the bottom of a slope first, the disc or a ring?

The disc. A rolling disc accelerates at two-thirds of g sin θ and a thin ring at only one-half, because more of a ring’s mass is at the rim. The result does not depend on mass or radius, only on shape.

How does the disc help find the stiffness of a torsion wire?

Hang the disc centrally from the wire and time its twisting oscillations. Since T = 2π√(I/C), the torsional constant is C = 4π²I/T². From C and the wire’s length and radius, the modulus of rigidity can then be calculated.

Why must the disc be uniform?

The formula ½MR² assumes mass is spread evenly. A disc that is thicker at the rim, dented or drilled off-centre has a different moment of inertia, and it may wobble when turning about its axis.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)