Search

In Stock

High Precision Balance – 220g/520g/1020g-0.001g

Advanced Force Restoration Transducer: Utilizes high-stability electromagnetic sensor technology to maintain 1mg resolution across the entire weighing spectrum, ensuring minimal sensitivity drift and rapid response times during intensive analytical procedures.

Integrated Metrological Data Interface: Equipped with a bi-directional RS232 port and specialized firmware for GLP-compliant data logging, allowing for seamless integration with Laboratory Information Management Systems (LIMS) for automated, error-free record-keeping.

₹1,540.00

Quick Answer: The High Precision Balance – 220g/520g/1020g-0.001g is an electronic laboratory balance listed in three capacity versions, 220 g, 520 g and 1020 g, all reading to 0.001 g. A high precision balance of this kind keeps milligram resolution even with heavier containers, for formulation, materials and sample-preparation work.

Milligram Resolution at Higher Capacity

Most milligram balances stop at a few hundred grams. A 1020 g version reading to 0.001 g has more than a million display steps, so a litre flask or a stack of sample dishes can be weighed while still seeing milligram changes. The 220 g and 520 g versions give the same readability for lighter work.

High resolution over a wide range puts weight on linearity: the balance must read correctly at every point between zero and full load, not only at the calibration mass. Checking with two or three known masses spread across the range shows whether it is linear enough for the work.

Applications

  • Weighing heavier vessels and sample dishes while keeping milligram resolution
  • Water absorption and evaporation-rate experiments in physics, chemistry and agriculture
  • Formulation work, adding ingredients one after another to a target mass
  • Loss-on-drying measurements on samples too large for a smaller balance

Absorption and Evaporation Experiments

Experiments that follow small mass changes on large samples suit this balance. Students can measure how much water a sample of soil, fabric, sponge or dry seeds takes up by weighing it before soaking and again after draining, at intervals. The reverse experiment, leaving a dish of water or a wet cloth on the pan and logging the mass every few minutes, measures evaporation rate and shows the effect of air movement, surface area and temperature. Because the samples and their containers are heavy compared with the changes being measured, a milligram display with several hundred grams of capacity is what makes these results readable.

Care & Handling

  • Keep the high precision balance on a heavy, level bench; with a million or more display steps, vibration and tilt show up quickly.
  • Shelter the pan from fans and air-conditioning outlets; a draft shield is advisable at this readability.
  • Stay within the capacity of the version you have; overloading strains the weighing cell.
  • Protect the pan with a tray or dish when weighing wet samples, and dry any spills straight away.

Specifications

Type Electronic high precision balance
Capacity 220 g, 520 g or 1020 g version
Readability 0.001 g (all versions)
Typical uses Formulation, materials testing, absorption and evaporation studies
Draft shield, pan size and calibration type Confirm at enquiry

Why Choose LabEquip

This balance suits formulation, materials and agricultural laboratories that weigh large samples but care about milligram changes. LabEquip lists it in its physics equipment range alongside the smaller 200 g/300 g milligram balance. Tell us which of the three capacities you need on the contact page.

Frequently Asked Questions

Which capacity version should I choose?

Add the heaviest container to the largest sample you expect and pick the version above that total. The 220 g version suits small dishes and bottles, 520 g covers most beakers and flasks with their contents, and 1020 g takes litre-scale vessels.

What is linearity and why does it matter on a high-capacity balance?

Linearity is how closely the reading follows the true mass across the whole range. A balance calibrated at one point can still read slightly off at other loads, so wide-range milligram balances are checked with several known masses.

How is evaporation rate measured on the balance?

Place a shallow dish of water on the pan, tare it, and record the loss of mass at fixed time intervals. Dividing the mass lost by the time and by the exposed surface area gives an evaporation rate that can be compared under different conditions.

Why weigh absorbed water rather than measure its volume?

Water held inside a sponge, soil or seed cannot be poured into a cylinder, but its mass can be found by weighing the sample before and after. Dividing by the dry mass gives the water absorbed per gram of material.

Is a 1020 g, 0.001 g balance as sensitive to drafts as an analytical balance?

Less so than a 0.1 mg balance, but at 1 mg air currents and temperature changes still show in the last digit, and a large pan catches more moving air. Shelter the balance and wait for a stable reading.

Can heavy samples be dropped onto the pan?

No. Lower heavy items gently onto the centre of the pan. A sudden impact applies a force far larger than the sample’s weight and can damage the weighing cell.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)