Search

In Stock

Graduated Ruler on Magnet

Règle graduée sur aimant, Non-Reflective Matte Finish Supports accurate Observation and data acquisition under high-intensity laboratory lighting, reducing ocular fatigue during multi-variable trials.

Impact-Resistant Surface Treatment Maintains experimental Consistency across high-cadence undergraduate laboratory rotations by preventing graduation fading and surface degradation.

$3.95

Quick Answer: A magnetic graduated ruler is a measuring scale with a magnetic backing, so it holds on a steel panel or magnetic whiteboard in any position. The magnetic graduated ruler is placed beside springs, pulleys and levers in vertical-board mechanics experiments to read positions, extensions and distances without a stand.

Measuring on a Vertical Board

Experiments built on a steel board, such as a spring hanging from a magnetic support or a lever pivoted on the board, need a scale that stays exactly where it is put. The magnetic graduated ruler does that: slide it alongside the spring, align it with a plumb line or the board edge and it holds without clamps, leaving the bench clear.

Because the ruler can be set at any angle, it also serves sloping strings in force-equilibrium work, the arms of a lever, and the travel of a load lifted by a pulley system. For a movable pulley, for example, the ruler shows the effort string moving twice as far as the load.

Reading It Accurately

Most errors with any ruler come from the end of the scale and from the angle of view. With the magnetic graduated ruler, read two positions and take the difference: the spring pointer before and after loading, or the two ends of a lever arm. That way a worn end or an offset zero cancels out.

Keep the eye level with the mark being read and the ruler as close as possible to the pointer, so parallax is small. When reading an extension, use the same point on the spring or the same pointer every time.

Specifications

Product Graduated measuring scale with magnetic backing
Mounting Holds on steel panels and magnetic whiteboards
Orientation Vertical, horizontal or angled as needed
Typical use Extensions, lever arms and displacements in board mechanics
Length and graduation Confirm at enquiry

Board Experiments

  • Reading spring extension for a Hooke’s law graph on a vertical board
  • Measuring lever-arm distances on a moments beam or disc
  • Comparing effort and load distances in pulley systems
  • Measuring pendulum length or drop heights against a wall board

Care & Handling

  • Keep the magnetic face clean; grit under it scratches the board and weakens the grip
  • Slide or lift the ruler off rather than dragging it across printed or painted surfaces
  • Store flat so the scale stays straight
  • Keep it away from compasses and magnetic-field experiments

Why Choose LabEquip

Teachers who run mechanics on a vertical board, for whole-class visibility or because bench space is short, need a scale that sticks beside the apparatus. LabEquip supplies the magnetic graduated ruler, the 600 x 400 mm dry-erase metal panel and other physics lab equipment for board-based practicals; contact LabEquip for class sets.

Frequently Asked Questions

What surface does the ruler stick to?

Any steel surface, including steel-backed whiteboards and dedicated metal practical panels. It will not hold on aluminium, glass or wood, which are not magnetic.

How is spring extension read with it?

Fix the ruler vertically beside the spring and note the pointer position with no load. Add each load, read the new position and subtract the first reading to get the extension.

Why read differences rather than single positions?

A difference between two readings cancels any error in where the scale starts, such as a worn end or a ruler placed with its zero slightly off the reference point.

How can the ruler be set exactly vertical?

Hang a plumb line or a thread with a small mass on the board and align the ruler edge with it. The board edge is a useful guide only if the board itself is mounted level.

How is parallax avoided?

Place the ruler as close as possible to the pointer or spring and look straight at the mark, with the eye level with it. Viewing from above or below shifts the apparent reading.

Will the magnet disturb other experiments?

It has no effect on mechanics measurements. Keep it away from plotting compasses, magnetic-field demonstrations and magnetic cards, which its magnet can influence.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)