Search

In Stock

Force Pump

Dual-Valve Compression System: Features an integrated air chamber and precision-seated non-return valves that facilitate a continuous fluid stream by utilizing compressed air to maintain discharge pressure during the piston's return stroke.

Optical-Grade Borosilicate Construction: Engineered with heavy-walled glass barrels and a high-tolerance manual plunger assembly, allowing for clear visual tracking of internal valve actuation and fluid dynamics during high-frequency classroom demonstrations.

$6.09

Quick Answer: The Force Pump is a demonstration model of the pump that pushes water out under pressure: a solid piston draws water into a barrel through an inlet valve, then forces it through an outlet valve into a delivery tube. The force pump model shows how valves and atmospheric pressure work together, and why a force pump can raise water higher than a lift pump.

Suction Stroke and Delivery Stroke

On the upstroke, the piston leaves a region of low pressure in the barrel. Atmospheric pressure acting on the water in the source pushes it up the suction pipe, opening the inlet valve at the foot of the barrel. On the downstroke, the inlet valve closes under the rising pressure and the piston drives the trapped water out through the outlet valve into the delivery tube. The outlet valve then stops it from running back.

The piston in a force pump is solid, unlike the valved piston of a lift pump, and that difference is the point of comparing the two models. Both rely on atmospheric pressure to fill the barrel, so neither can draw water from more than about ten metres below, but the force pump pushes water out under pressure on its downstroke, so the height it can deliver to depends on the force applied rather than on the atmosphere.

Many force pumps add an air vessel on the delivery side. Water entering it compresses the trapped air, which keeps pushing water out between strokes and turns a pulsing flow into a steadier stream, the principle once used in hand-worked fire engines. School models are often made of glass with simple float valves, so every stage can be watched; whether this one has an air vessel, and its barrel material, are not stated in the title. The hand pump model in our STEM range is a simpler companion for younger classes.

Specifications

Type Force pump demonstration model
Piston Solid piston without a valve
Valves Inlet valve at the barrel foot, outlet valve to the delivery tube
Principle Atmospheric pressure fills the barrel; the piston forces water out
Air vessel, barrel material and size Confirm at enquiry

Teaching Uses

  • Explaining how hand-operated force pumps and early fire pumps worked
  • Comparing the force pump with the lift pump in lessons on air pressure
  • Showing the action of one-way valves in a working cycle
  • Discussing the suction limit and why deep wells need pumps placed down near the water

Care & Handling

  • Prime the barrel with a little water so the valves seal before pumping.
  • Pump smoothly; jerking the handle can unseat the valves or splash water.
  • Drain the model after use, as water left inside can foul the valves.
  • Handle glass parts with care and check valves and piston seals periodically.

Why Choose LabEquip

Teachers explaining pumps alongside air pressure often buy the force pump and lift pump together, so students can see how one change in the piston changes what a pump can do. Both are in our Physics Equipments; contact LabEquip for details of this model.

Frequently Asked Questions

What is the difference between a force pump and a lift pump?

A lift pump has a valve in its piston and raises water on the upstroke to an outlet at the top of the barrel. A force pump has a solid piston and pushes water out through a separate outlet valve on the downstroke, so it can deliver water under pressure to a height.

Why can a force pump deliver water higher than a lift pump?

Its delivery depends on the force pushing the piston down, not on atmospheric pressure. Only the suction side is limited by the atmosphere; the delivery side can lift water as high as the applied force and the pump’s strength allow.

What does the air vessel do?

It holds a cushion of air that is compressed by each delivery stroke. Between strokes the compressed air keeps pushing water out, so the flow becomes steadier instead of coming in spurts.

Why do the valves need to be wet before pumping?

Dry valves may not seal against their seats, letting air leak past. Priming the barrel with water seals them so that the upstroke can create the low pressure needed to draw water in.

Why is there a limit to how deep a pump at the surface can draw water?

Water is pushed up the suction pipe by atmospheric pressure, which can support a column of water only about ten metres high. For deeper wells, the pump itself is placed down near the water.

Which valve opens on each stroke?

On the upstroke the inlet valve opens and the outlet valve stays shut. On the downstroke the inlet valve closes and the outlet valve opens to let water into the delivery tube.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)