Search

In Stock

Fletcher Trolley

Reinforced Low-Friction Track: Features a 1.5-meter stabilized hardwood or metallic rail assembly with an integrated precision-machined pulley, ensuring minimal rotational inertia and optimal axial alignment during constant force application.

Synchronized Displacement Recording: Equipped with a variable-frequency vibrating lath or ticker-timer interface that captures high-resolution longitudinal markers, enabling sub-millisecond calculation of acceleration profiles across diverse mass distributions.

₹750.00

Quick Answer: A Fletcher trolley is a classic mechanics apparatus in which a trolley is pulled along a level track by a load falling over a pulley, while a vibrating steel strip with an inked brush draws a wavy trace on paper. The trace records the motion, showing uniform acceleration and its dependence on force and mass.

A Timer Built from a Vibrating Strip

Before electronic timers, Fletcher’s apparatus solved the problem of recording rapidly changing motion with a simple mechanical clock: a steel strip that, once plucked, vibrates at its own steady natural frequency. A small brush charged with ink on the strip marks a paper strip, and as the trolley moves the brush traces a wave along the paper. Every complete wave takes the same time, so the wave pattern is a timescale written directly onto the record of motion.

When the trolley is at rest, the brush simply draws back and forth on one spot. As the falling load accelerates the trolley, the waves stretch out, each one longer than the last. Measuring successive wavelengths shows them increasing by an almost constant amount, which is the signature of uniform acceleration.

In catalogue versions the trolley runs on a track supported on stands, with the vibrator clamped to one stand and a pulley with a scale pan at the other end; the trolley may carry removable weights so that its mass can be varied. The exact construction should be confirmed at enquiry.

Investigating Newton’s Second Law

First tilt or adjust the track so that friction is compensated. Then pull the trolley with different loads in the scale pan, keeping the total mass constant by transferring weights between the trolley and the pan, and measure the acceleration from each trace. Acceleration proves proportional to the pulling force. Repeating with a fixed force and increasing trolley mass shows acceleration inversely proportional to mass.

Specifications

Type Fletcher’s trolley apparatus
Timing Vibrating steel strip with inked brush tracing a wave on paper
Driving force Load in a scale pan falling over a pulley
Record Wave trace whose wavelengths give velocity and acceleration
Track, stands and weights supplied Confirm at enquiry

Applications

  • Showing uniform acceleration from the steady increase in wavelength
  • Verifying that acceleration is proportional to force at constant total mass
  • Showing that acceleration is inversely proportional to mass for a fixed force
  • Comparing a mechanical timing method with a ticker tape timer

Care & Handling

  • Clean the brush and ink reservoir after use so the ink does not dry and clog it.
  • Check that the strip vibrates freely and is clamped tightly at its base.
  • Guide the scale pan so it does not swing into the bench as it falls; place a soft pad below it.
  • Dismantle the stands and track for storage and keep the trolley wheels clean.

Why Choose LabEquip

Physics teachers buy the Fletcher trolley for a hands-on, low-technology study of acceleration that shows students exactly how a motion record is made, and it is a long-standing piece of mechanics lab equipment. LabEquip lists it in its physics lab equipment, with the ticker tape timer as the electrical alternative; contact our team via the contact page.

Frequently Asked Questions

How does the vibrating strip measure time?

A steel strip clamped at one end vibrates at a steady natural frequency. Each complete wave drawn by its brush therefore takes the same time, so the trace acts as a built-in timescale.

How is acceleration found from the trace?

Measure successive wavelengths along the trace. Each wavelength is the distance moved in one period of the strip, so the increase from one wave to the next divided by the square of the period gives the acceleration.

Why keep the total mass constant when changing the force?

The falling load is also accelerated. Moving weights from the trolley to the pan increases the pulling force while keeping the total accelerated mass the same, so only the force changes.

Why must friction be compensated?

Friction opposes the motion and reduces the net force. Adjusting the track so the trolley just keeps moving at steady speed lets the pulling force be treated as the net force.

What is the difference between this and a ticker tape timer?

Both record motion against equal time intervals. The Fletcher trolley uses a vibrating strip and ink trace, while a ticker timer uses an electrically driven striker that prints dots.

Does the frequency of the strip need to be known?

For the acceleration in standard units, yes; it can be found by timing many vibrations or comparing with a known timer. For showing proportionality between force and acceleration, equal time intervals alone are enough.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)