Search

In Stock

FINE IRON FILING

Uniformly sized, finely milled particles for clear and well-defined magnetic field patterns

Clean, low-impurity iron composition ensuring consistent response to magnetic fields

$3.26

Quick Answer: Fine Iron Filings are small particles of iron sprinkled around magnets and current-carrying conductors to make the shape of a magnetic field visible. Each filing becomes a tiny temporary magnet and lines up with the field, so fine iron filings trace out field lines on a sheet of paper or card in school magnetism lessons.

Why the Filings Line Up

Iron is a ferromagnetic material. When an iron filing sits in a magnetic field, it is magnetised by induction, becoming a small magnet with its own north and south ends. The field then turns it to lie along the field direction, just as a compass needle turns, and neighbouring filings attract each other end to end to form chains. These chains follow the field lines: crowded where the field is strong, near the poles, and spreading out where it is weak.

Friction with the paper stops many filings from turning on their own, so the sheet is tapped gently after sprinkling. Each tap lets the filings jump slightly and settle again in line with the field, and after a few taps the pattern sharpens. Fine filings show more detail than coarse ones, which is why fine grades are preferred for pattern work.

Patterns Worth Showing

Around a single bar magnet the filings curve from pole to pole. Two magnets with unlike poles facing produce lines that bridge the gap, while like poles facing produce lines that bend away from each other, leaving a neutral point between them. Around a straight wire carrying a current, filings form circles centred on the wire, and around a solenoid the pattern outside looks like that of a bar magnet, with nearly parallel lines inside. The field of a wire is weak, so a large current is needed briefly from a low-voltage, high-current supply, and the circuit should be switched off between observations.

Demonstrations

  • Field patterns of bar, horseshoe and disc-shaped magnets
  • Comparing the fields between like and unlike poles and finding neutral points
  • Showing circular field lines around a straight current-carrying wire
  • Showing the bar-magnet-like field of a current carrying solenoid

Specifications

Material Iron, fine grade filings
Use Making magnetic field patterns visible
Used with Bar, disc and horseshoe magnets, solenoids, straight conductors, paper or card
Applying Sprinkle from a shaker onto a sheet over the magnet, then tap gently
Quantity and container Confirm at enquiry

Care & Handling

  • Always place a sheet of paper, card or clear plastic over the magnet; fine iron filings that touch a magnet are very hard to remove.
  • Return filings to a shaker or jar by folding the sheet into a funnel, and keep them in a closed, dry container to stop rusting.
  • Avoid rubbing eyes while handling filings and wash hands afterwards; do not blow loose filings off the bench.
  • Keep filings away from electronic equipment and the moving parts of meters.

Why Choose LabEquip

Physics departments use iron filings in almost every magnetism unit, so a stock is needed for each practical group and for demonstrations. LabEquip lists this item in its physics lab equipment range. Ask about quantities and packing through the LabEquip contact page.

Frequently Asked Questions

Why do iron filings line up along the field lines?

Each filing is magnetised by the field and becomes a tiny magnet. The field then turns it to lie along its direction, and neighbouring filings attract end to end, forming chains that follow the field lines.

How can the filings be kept off the magnet?

Lay a sheet of paper, thin card or clear plastic over the magnet before sprinkling. A sealed plastic bag around the magnet also works. Filings stuck to a bare magnet are very difficult to clean off.

How can a pattern be made permanent?

Sprinkle the filings on waxed paper, tap them into a pattern and warm the paper gently so the wax holds them, or spray the pattern lightly with a fixative. Photographing the pattern is the simplest record of all.

Why is the pattern around a straight wire hard to see?

The field of a single straight wire is weak compared with a magnet’s. A large current is needed, supplied briefly from a low-voltage, high-current source, and the filings must be tapped well to show the circular pattern.

What does a filings pattern not show?

It shows the shape of the field but not its direction. Plotting compasses placed around the magnet show which way the field points, from north to south outside the magnet.

How should iron filings be stored?

In a closed, dry container or shaker. Fine iron rusts quickly in damp air, and rusted filings clump together and give poorer patterns.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)