Search

In Stock

DISC-SHAPED MAGNET

Uniform Magnetic Field Across Flat Surfaces: Ensures consistent experimental results in classroom and laboratory demonstrations.

High-Strength Neodymium or Ferrite Material: Provides reliable magnetic force suitable for lifting, attraction, and field visualization experiments.

₹320.00

Quick Answer: The Disc-Shaped Magnet is a permanent magnet in the form of a flat, round disc. A disc magnet is normally magnetised through its thickness, so one flat face is a north pole and the other a south pole, which makes it convenient for pole-finding, repulsion and field-pattern practicals.

Where the Poles Are on a Disc

Unlike a bar magnet, whose poles sit at its two ends, a disc-shaped magnet usually has its poles on its two flat faces. This axial magnetisation is the common pattern for disc magnets, though discs magnetised across a diameter also exist, so the first job in any lesson is to check the poles with a plotting compass. Held close to one face, the compass needle swings round; turning the disc over reverses the needle.

Because the poles are spread over wide flat faces, two discs stack neatly when opposite faces meet and push apart strongly when like faces are turned towards each other. That geometry is what makes discs useful for repulsion demonstrations, for building stacks on a non-magnetic rod, and for simple magnetic levitation set-ups.

Disc magnets are made in ferrite (ceramic), alnico and rare-earth materials such as neodymium-iron-boron. Ferrite discs are dark grey, brittle and moderately strong; neodymium discs are usually nickel-plated and very much stronger for their size. The material, diameter and strength of this disc should be confirmed when ordering.

Experiments with Disc Magnets

  • Identifying north and south faces with a plotting compass and testing the rule that like poles repel
  • Mapping the field around a single disc and around two discs facing each other with fine iron filings
  • Measuring how the repulsive force between two discs falls with distance, using a top-pan balance and spacers
  • Showing magnetic shielding by placing iron, aluminium and card sheets between a disc and a compass

Specifications

Form Flat circular permanent magnet
Usual magnetisation Through the thickness: flat faces are the poles (check with a compass)
Typical classroom uses Pole identification, attraction and repulsion, field mapping
Pairs well with Plotting compass, iron filings, non-magnetic rod
Material, diameter and strength Confirm at enquiry

Care & Handling

  • Separate attracted disc magnets by sliding them sideways rather than prising them apart, which can chip brittle ferrite.
  • Store discs stacked north to south, or with a soft-iron keeper, away from heat sources.
  • Keep the disc magnet away from mechanical watches, magnetic-stripe cards and anyone with an implanted medical device.
  • Do not let strong discs snap together near fingers or let young children handle small magnets that could be swallowed.

Why Choose LabEquip

Physics teachers buy disc magnets in sets so that each bench has a pair for repulsion and field-pattern work. LabEquip lists this magnet in its physics lab equipment range; for levitation by repulsion, the floating ring magnet apparatus uses magnets of a similar flat form threaded on a rod. Ask for quantities and grade through our contact page.

Frequently Asked Questions

Where are the poles on a disc magnet?

On most disc magnets the poles are the two flat faces, because the disc is magnetised through its thickness. Some are magnetised across a diameter instead, so a quick check with a plotting compass near each face and each edge confirms the pattern.

How can I tell which face is the north pole?

Bring a plotting compass close to one face. The end of the needle that normally points north is attracted to a south pole, so if that end swings towards the face, the face is a south pole. Mark the faces with a small dot of paint once identified.

Why do two disc magnets suddenly jump together?

The attraction between magnets grows rapidly as the gap gets smaller, so the pull is weak at a distance and then becomes very strong in the last few millimetres. With strong rare-earth discs this can pinch skin, so keep fingers clear and work on a flat bench.

Can a disc magnet lose its magnetism?

Yes, gradually. Heating, repeated hard knocks and being held with like poles forced together in a strong opposing field can all weaken it. Storing discs in attracting pairs and away from heat keeps them magnetised for years.

How is a disc magnet different from a ring magnet?

A ring magnet has a central hole, so it can slide on a rod for levitation or be mounted on a spindle. A disc has a solid face, which gives a more uniform field over the face and suits pole-finding, stacking and force-distance measurements.

What happens if a disc magnet is dropped through a copper tube?

If the magnet is strong, it falls noticeably more slowly than a non-magnetic object. The moving field induces eddy currents in the copper, and by Lenz’s law their own field opposes the motion. Weak ferrite discs show only a small effect.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)