Search

In Stock

Expansion of Solids and Liquids

TP Expansion thermique des solides et des liquides utilizes a ruggedized measurement interface with a 0.01 mm sensitivity dial gauge or optional digital sensor for precise linear expansion tracking.

Integrated Multi-Phase Assembly Features a specialized expansion vessel for liquids and a multi-material rod array (Aluminum, Brass, Steel) for comprehensive comparative analysis across different states of matter.

₹45,623.00

Quick Answer: The expansion of solids and liquids apparatus lets students measure how much materials grow when heated, both the length increase of solid rods and the volume increase of a liquid. It is used to determine expansion coefficients and to show why a liquid’s apparent expansion depends on its container.

Solids: Linear Expansion

When a solid is heated its atoms vibrate with larger amplitude and their average separation increases slightly, so the object grows in every direction. For a rod the length change is ΔL = αL₀Δθ, where α is the linear expansion coefficient, L₀ the original length and Δθ the temperature rise. The change is small for ordinary metals, so it is usually read on a dial gauge or magnified by a lever pointer.

Comparing rods of different metals heated through the same temperature rise shows that each material has its own coefficient; aluminium expands more than brass, which expands more than steel. Passing steam or hot water through a hollow rod gives a uniform, known temperature along its length.

Liquids: Real and Apparent Expansion

A liquid has no fixed length, so only its volume expansion is measured. The liquid fills a flask or bulb closed with a narrow tube, and as it is warmed the level rises up the tube, magnifying the small volume change. When heating starts, the level often dips briefly before rising: the glass warms and expands first, enlarging the container before the heat reaches the liquid.

That observation leads to the distinction between apparent and real expansion. The rise in the tube shows the liquid’s expansion minus the container’s, so the true volume coefficient of the liquid is the apparent coefficient plus the cubic coefficient of the glass. Water is the notable exception to steady expansion: between 0 °C and 4 °C it contracts on warming.

Specifications

Product Apparatus for thermal expansion of solids and liquids
Solid measurement Length change of a rod, ΔL = αL₀Δθ
Liquid measurement Volume change shown by a level rising in a narrow tube
Concepts Linear and cubic coefficients, real and apparent expansion
Rods, liquid vessel, gauge and heating method supplied Confirm at enquiry

Experiments

  • Determining the linear expansion coefficient of metal rods
  • Comparing expansion of different metals under the same temperature rise
  • Showing the initial dip and later rise of a liquid level on heating
  • Calculating real and apparent volume expansion of a liquid

Care & Handling

  • Let steam and hot water drain and the apparatus cool before handling rods or glassware
  • Zero the gauge or pointer only after the rod has settled at room temperature
  • Fill the liquid vessel without trapping air bubbles, and use coloured water or the liquid recommended so the level is easy to read
  • Clamp glass parts gently and warm them gradually to avoid cracking

Why Choose LabEquip

Schools and colleges that want both forms of thermal expansion covered in one practical choose this apparatus over separate units such as the linear expansion apparatus and the expansion of liquid apparatus. Contact LabEquip to confirm what the set includes.

Frequently Asked Questions

Why does the liquid level fall slightly when heating begins?

The glass container is heated first and expands, so its volume grows before the liquid has warmed. The level drops briefly, then rises once the liquid’s larger expansion takes over.

What is the difference between real and apparent expansion of a liquid?

Apparent expansion is what the level in the tube shows, which is the liquid’s expansion minus that of the container. Real expansion adds back the container’s expansion to give the liquid’s true change in volume.

Why do different metal rods expand by different amounts?

Each metal has its own linear expansion coefficient, set by how strongly its atoms are bonded. Under the same temperature rise a rod of a high-coefficient metal such as aluminium grows more than one of steel.

How is such a small length change measured?

Usually with a dial gauge or a lever pointer that magnifies the movement. The rod’s initial length and temperature rise are measured, and the coefficient is calculated from ΔL = αL₀Δθ.

Why does a narrow tube make liquid expansion visible?

The extra volume of liquid has to go somewhere, and in a narrow tube a small volume corresponds to a long column. The narrower the tube, the larger the rise for the same expansion.

Does water expand normally when heated?

Above 4 °C it does, but between 0 °C and 4 °C water contracts as it warms, reaching its greatest density at about 4 °C. This anomaly explains why lakes freeze from the top down.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)