Search

In Stock

ELDERBERRY PITH BALLS

Ultra-low mass natural pith construction ensuring high sensitivity to electrostatic forces

Uniform spherical geometry with smooth surface finish for consistent experimental response

$4.91

Quick Answer: Elderberry Pith Balls are very light spheres made from the soft, spongy pith of elder stems, hung on insulating threads to show the forces between electric charges. Because they weigh so little, pith balls respond visibly to the small forces produced by rubbed rods and other static charges in school electrostatics experiments.

Why Pith Works So Well

The pith at the centre of elder stems is mostly air held in thin cell walls, so a small ball of it has almost no weight. The electrostatic forces from a charged polythene or glass rod are tiny, but on such a light object they are easily strong enough to swing it on its thread. Elder pith has been used for this purpose since the earliest electrical experiments, and a pith ball on a silk thread is still one of the simplest charge detectors there is.

Dry pith is a poor conductor. Some pith balls are coated with a conducting layer such as graphite or metallic paint, which spreads any charge over the whole surface and makes their behaviour more repeatable; whether these balls are plain or coated should be confirmed when ordering. Either type works for the basic demonstrations.

From Attraction to Repulsion

Bring a charged rod near a neutral pith ball and the ball swings towards it: the rod’s charge attracts opposite charge to the near side of the ball (or polarises its molecules) and repels like charge to the far side, and the nearer charge wins. If the ball touches the rod, it picks up some of the rod’s charge and is then pushed away, because like charges repel. This attract-touch-repel sequence surprises most students and is the starting point for explaining charging by contact and by induction.

Two balls hung side by side from the same point can be given equal charges by touching them together against the rod. They then spread apart, and the angle between the threads, the thread length and the mass of a ball allow the repulsive force, and from it the approximate charge, to be estimated with Coulomb’s law.

Experiments

  • Showing that like charges repel and unlike charges attract
  • Demonstrating charging by contact and charging by induction
  • Building a simple pith-ball electroscope to test whether an object is charged
  • Estimating the charge on two suspended balls from their separation angle using Coulomb’s law
  • Showing the strong field near a Van de Graaff generator dome, where pith balls fly off repeatedly

Specifications

Material Elder (elderberry) pith
Form Small lightweight spheres for hanging on threads
Use Showing electrostatic attraction, repulsion and charging
Pairs well with Silk or nylon thread, insulated stand, polythene and acetate rods, cloth
Size, quantity and surface coating Confirm at enquiry

Care & Handling

  • Hang pith balls from silk or nylon thread; cotton absorbs moisture and lets charge leak away.
  • Handle the balls with forceps or by the thread, since skin oils and moisture make the surface conductive.
  • Store them in a closed, dry container; pith is fragile and crushes easily.
  • Warm the room or the rods slightly on humid days to keep surfaces dry.

Why Choose LabEquip

Physics departments buy elderberry pith balls in quantity because they are small consumables that every group needs for electrostatics practicals. LabEquip lists them in its physics lab equipment range. For quantities and whether coated balls are needed, contact us through the LabEquip contact page.

Frequently Asked Questions

Why is elder pith used for these balls?

Elder pith is extremely light because it is mostly air trapped in thin cell walls. The very small forces produced by static charges can therefore move a pith ball noticeably, which makes the forces easy to see.

Why does a neutral pith ball jump to a charged rod and then fly away?

The rod first attracts the ball by inducing opposite charge on its near side. On contact, the ball gains some of the rod’s charge, and since like charges repel, it is then pushed away.

How can the charge on the balls be estimated?

Hang two equally charged balls from the same point and measure the angle between the threads. The electric force equals the weight multiplied by the tangent of half that angle, and Coulomb’s law then gives the approximate charge.

What is the difference between coated and uncoated pith balls?

Uncoated pith is a poor conductor, so charge stays roughly where it was placed. A conducting coat spreads the charge evenly over the surface, giving more consistent attraction and repulsion from one trial to the next.

Why do electrostatics experiments fail on humid days?

A thin film of moisture forms on threads, rods and stands and lets charge leak away. Working in a dry, warm room and keeping the materials dry makes the effects much stronger.

Which thread should the pith balls hang from?

A fine silk or nylon thread. Both are good insulators that absorb little moisture, so the ball keeps its charge. Cotton thread is less suitable because it takes up water from the air.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)