Search

In Stock

Educational Camera

Pack Caméra didactique + Cinéris, Integrated Cinéris Analysis Software enables the technical Synthesis of empirical data into parabolic and linear motion models, supporting Advanced Dynamics.

Automated Object Tracking supports student Evaluation of projectile trajectories and energy conservation by eliminating manual plotting errors.

Ruggedized Mounting Hardware Ensures laboratory Consistency across multi-user undergraduate rotations, maintaining sensor alignment and calibration integrity.

$73.77

Quick Answer: An educational camera is a video camera intended for classroom and laboratory use, chiefly for recording experiments so that the motion can be analysed frame by frame on a computer. Students mark the position of a moving object in each frame and obtain displacement, velocity and acceleration from the known time between frames.

From Video Frames to Velocity

Every video is a sequence of still pictures taken at regular intervals. At 25 frames per second the interval is 0.04 s; at 100 frames per second it is 0.01 s. When the position of a ball is marked in successive frames, the change in position divided by the interval gives its average velocity over that interval, and the change in velocity gives the acceleration. Video-analysis software automates the marking and plots the graphs, but the physics is the same as working through the frames by hand.

To turn positions on the screen into metres, a reference length must appear in the picture, in the same plane as the motion. A metre rule fixed behind a pendulum or along a track is enough. The software uses it to scale every measurement, so placing it carelessly, nearer to or further from the camera than the moving object, introduces a scale error in every result.

Getting Usable Footage

Place the educational camera square on to the plane of motion and as far back as the zoom allows, so perspective distorts the edges of the picture as little as possible. Use bright, steady light: a short exposure keeps a fast object sharp, but only if enough light reaches the sensor. Mains-powered lamps often pulse at twice the supply frequency, and at higher frame rates this appears as flicker from frame to frame; daylight or a battery lamp avoids it. A plain, contrasting background makes the moving object easy to pick out.

Experiments Suited to Video Analysis

  • Projectile motion: horizontal and vertical components plotted separately
  • Free fall and measurement of g from the position against time curve
  • Pendulum and spring oscillations, including damping
  • Rolling balls on tracks and trolleys on inclined planes
  • Collisions, with momentum compared before and after

Specifications

Type Camera for classroom and laboratory video capture
Main use Recording experiments for frame-by-frame motion analysis
Data obtained Position against time, then velocity and acceleration
Accessories normally used Tripod, reference scale, steady lighting
Frame rates, computer connection and software Confirm at enquiry

Care & Handling

  • Mount the camera on a tripod or clamp rather than holding it, so the frame does not shift between shots.
  • Clean the lens only with a lens tissue or a soft brush.
  • Keep the camera clear of launchers, falling masses and water used in splash experiments.
  • Store it with its leads in a closed case away from dust and heat.

Why Choose LabEquip

Physics teachers buy an educational camera when they want students to collect their own motion data from experiments that are too quick for a stopwatch. LabEquip lists it in the physics lab equipment range together with a synchronisation cable for the Jeulin fast camera for triggered high-speed work. Send the frame rates, software and connection you need through the contact page.

Frequently Asked Questions

How does video analysis measure speed?

The time between frames is fixed by the frame rate, for example 0.04 s at 25 frames per second. Measuring how far an object moves between frames and dividing by that time gives its velocity, and the change in velocity over time gives its acceleration.

Why must a scale be visible in the picture?

The software can only measure distances in pixels until it is told how many pixels make a known length. A metre rule placed in the same plane as the motion provides that conversion for every frame.

Why do fast objects look blurred in the video?

The object keeps moving while each frame is exposed, so it smears across the picture. Brighter lighting lets the camera use a shorter exposure, which freezes the motion more sharply.

Why does the picture flicker under classroom lights?

Many mains-powered lamps vary in brightness at twice the supply frequency. At higher frame rates successive frames catch the lamp at different brightness. Daylight, battery lamps or steady LED panels remove the problem.

Where should the camera be placed?

Set it square on to the plane in which the object moves, at the same height as the middle of the motion, and as far back as the zoom allows. This reduces perspective error and keeps the scale valid across the frame.

Which experiments suit standard frame rates?

Motions lasting a second or more, such as a pendulum, a ball rolling along a track or a projectile crossing a metre or two, are captured well at normal video rates. Impacts and collisions lasting milliseconds need a high-speed camera, ideally started by a trigger.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)