Search

In Stock

Distillation Apparatus

Heat-Resistant Borosilicate Glassware: Maintains dimensional stability under repeated thermal cycling.

Interchangeable Jointed Components: Allows modular assembly for simple and fractional distillation setups.

$25.97

Quick Answer: The Distillation Apparatus is a glass set-up that boils a liquid in a flask, passes the vapour through a water-cooled condenser and collects the condensed liquid in a receiver. Science classes use the distillation apparatus to separate a liquid from dissolved substances and to study boiling, condensation and latent heat in practice.

The Physics Behind the Separation

Distillation is a change-of-state process run in two stages. In the flask, heat supplied by a burner or heating mantle first raises the liquid to its boiling point and then provides the latent heat of vaporisation, so the temperature of boiling water stays steady even though heating continues. In the condenser the reverse happens: the vapour gives up that latent heat to the cooling water flowing through the outer jacket and turns back into liquid. Dissolved solids such as salt or dye do not vaporise at the liquid’s boiling point, so they stay behind in the flask.

Feeling the condenser outlet water during a run shows students that energy is being carried away; with a thermometer at the inlet and outlet and a measured flow of cooling water, a senior class can even estimate the rate at which latent heat is removed.

Setting Up for a Clean Run

A typical school arrangement uses a round-bottom or distillation flask clamped above the heat source, a still head or side arm carrying a thermometer, a Liebig-type condenser sloping down to the receiver, and clamps on a retort stand. The thermometer bulb should sit level with the opening of the side arm so that it reads the temperature of the vapour leaving the flask rather than the liquid. Cooling water goes in at the lower end of the condenser and out at the upper end. A few anti-bumping granules in the flask prevent violent, sudden boiling, and the flask should never be more than about two-thirds full.

The exact parts supplied with this distillation apparatus, the glass type and the flask capacity should be confirmed when ordering, as sets are put together in several configurations.

Specifications

Type Glass distillation set-up (flask, still head, condenser, receiver)
Principle Boiling and condensation; separation by boiling point
Typical heat source Burner with gauze, or heating mantle
Cooling Tap water through the condenser jacket
Supplied parts, glass type and capacity Confirm at enquiry

Lessons and Practicals

  • Obtaining pure water from salt water or inky water and testing the distillate
  • Showing that the boiling temperature stays steady while latent heat is supplied
  • Explaining evaporation and condensation in the water cycle with a working model
  • Introducing the separation of miscible liquids with different boiling points before fractional distillation is taught

Care & Handling

  • Clamp the flask at the neck and support the condenser separately; glass joints should never carry the weight of other parts.
  • Start the cooling water before heating, and keep it running until the apparatus has cooled.
  • Never heat a completely closed system: the receiver end must stay open to the air.
  • Allow the glassware to cool before dismantling, then rinse each part and dry it upside down.

Why Choose LabEquip

School science departments usually keep one or two distillation set-ups for demonstrations and group practicals on separation and states of matter. LabEquip lists this apparatus in Physics Equipments; the chemistry-range distillation apparatus suits laboratories that want a set kept with their chemistry glassware. Ask about the parts included through the LabEquip contact page.

Frequently Asked Questions

Why does cooling water enter the condenser at the bottom?

Feeding water in at the lower end keeps the jacket completely full, with no trapped air pocket, and makes the coldest water meet the vapour just before it leaves for the receiver. This counter-flow arrangement removes heat most effectively.

Where should the thermometer bulb sit?

Level with the opening of the side arm or still head. In that position it measures the temperature of the vapour that is passing into the condenser, which is the boiling point of the substance distilling over.

Why are anti-bumping granules added to the flask?

Liquids can heat slightly above their boiling point without forming bubbles and then boil violently all at once. Porous granules give bubbles somewhere to form, so boiling stays smooth. Add them before heating, never to a hot liquid.

How can students show that the distillate is purer than the starting liquid?

Evaporate a few drops of each on a watch glass and compare the residue, or compare their electrical conductivity with a simple circuit. Distilled water from salt water leaves no residue and conducts far less.

What does distillation show about latent heat?

While the liquid boils, its temperature stays constant even though heat is still being supplied. That energy is the latent heat of vaporisation, and it is released again in the condenser, where it warms the cooling water.

Can the apparatus produce distilled water for routine lab use?

It can make small batches, but it is slow. Laboratories that need distilled water every day normally use a dedicated water still, and keep this apparatus for teaching the process.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)