Quick Answer: The Digital Infrared Thermometer is a non-contact instrument that calculates the temperature of a surface from the thermal radiation it emits. In the physics laboratory a digital infrared thermometer is a quick way to read hot, moving or delicate surfaces, and a practical way to teach how radiation depends on temperature and surface finish.
Measuring Temperature From Radiation
Every object above absolute zero emits electromagnetic radiation, and at everyday temperatures most of it lies in the infrared. The power radiated rises steeply with temperature: for an ideal black body it is proportional to the fourth power of absolute temperature, the Stefan–Boltzmann law. A lens in the thermometer collects radiation from a spot on the target and focuses it onto a detector, typically a thermopile, whose output the electronics convert into a temperature reading.
Real surfaces emit less than a black body at the same temperature. The ratio is the emissivity, close to 1 for matt paint, skin, wood and most non-metals, and much lower for polished metals. The thermometer assumes a particular emissivity, often adjustable on more advanced models, so a shiny metal surface reads well below its true temperature unless it is covered with matt tape or paint.
Uses
- Demonstrating emissivity with a Leslie’s cube
- Plotting cooling curves for Newton’s law of cooling
- Checking temperatures of hot plates, heating coils and resistors in circuits
- Surveying heat loss from windows, walls and insulated containers
- Comparing non-contact readings with a contact thermometer
Physics Practicals
A Leslie’s cube filled with hot water makes the emissivity point vividly: pointing the thermometer at the matt black, matt white, dull metal and polished faces in turn gives very different readings even though all four faces are at the same temperature. Recording the surface temperature of a cooling beaker or calorimeter every minute produces a cooling curve for Newton’s law of cooling without disturbing the liquid with a probe. Students can also see the effect of the distance-to-spot ratio by stepping back from a small hot object until the reading falls, as the measured spot grows larger than the target.
Specifications
| Instrument | Digital infrared (non-contact) thermometer |
| Principle | Thermal radiation collected on an infrared detector |
| Reads | Surface temperature only, not internal or air temperature |
| Settings worth understanding | Emissivity and distance-to-spot ratio |
| Temperature range, emissivity setting and laser pointer | Confirm at enquiry |
Care & Handling
- Keep the lens clean and dry; dust or fingerprints on it reduce the radiation reaching the detector.
- Never point a laser aiming beam, if fitted, towards anyone’s eyes.
- Let the instrument adjust to room temperature for several minutes after moving it between hot and cold places.
- Remove the battery when storing it for long periods.
Why Choose LabEquip
Physics departments buy infrared thermometers for heat and radiation topics, and the same unit is useful across the science laboratory. LabEquip lists this thermometer in its Physics Equipments; a copper calorimeter gives a simple target for cooling-curve work. Check ranges and features through the LabEquip contact page.
Frequently Asked Questions
Why does a shiny metal surface read cooler than it is?
Polished metal has a low emissivity, so it emits much less infrared than a matt surface at the same temperature and also reflects radiation from its surroundings. Cover a spot with matt black tape or paint, wait for it to reach the same temperature, and measure that.
Can it measure the temperature of air or the inside of a liquid?
No. It reads the surface that fills its field of view. Air is almost transparent to infrared, and for a liquid it reads only the surface layer, so stir the liquid or use a probe thermometer for its bulk temperature.
What is the distance-to-spot ratio?
It describes how large an area the thermometer measures at a given distance. As you move back, the spot grows. The target must fill the spot completely, otherwise the reading includes the cooler or hotter background.
Can it be used as a body thermometer?
Not unless it is specifically designed and calibrated for body temperature. General-purpose infrared thermometers read surfaces across a wide range and are not intended for checking fever; use a clinical thermometer for that.
Why does the reading change through glass?
Ordinary glass absorbs most of the infrared wavelengths the thermometer uses, so pointing it at an object behind a window measures the glass, not the object. Measure with nothing between the instrument and the target.
How does this help teach the Stefan–Boltzmann law?
The instrument itself relies on the steep rise of radiated power with temperature. Using it on surfaces of known temperature and different finishes lets students see that emission depends on both temperature and emissivity, the two factors in the law.
Last Updated: October 2026










Reviews
There are no reviews yet.