Search

In Stock

Digital Electronic Weighing Balance, 300g, 0.01g, Economy

High-Stability Strain Gauge Transducer: Utilizes a precision-compensated load cell to maintain 0.01g resolution and fast stabilization times, ensuring accurate quantitative data acquisition across the full weighing range.

Backlit LCD with Piece-Counting Firmware: Integrated with high-contrast display technology and specialized software for automated unit conversion and parts counting, streamlining inventory management and repetitive laboratory workflows.

$16.02

Quick Answer: The Digital Electronic Weighing Balance, 300g, 0.01g, Economy is an economy electronic balance that weighs up to 300 g and reads to 0.01 g. This digital weighing balance 300g model is chosen for weighing small quantities of chemicals, specimens and components in school laboratories and workshops.

Small Loads, Fine Steps

With a 300 g maximum and 0.01 g readability, this balance trades capacity for resolution compared with its 600 g, 0.1 g sibling: it carries half the load but shows steps ten times finer. That suits work with small masses, such as a few grams of salt for a solution, a pinch of seeds, small metal pieces or coins, where a 0.1 g step would be too coarse to show the differences that matter.

As an economy model it is meant for straightforward weighing and taring rather than laboratory data handling, which keeps it simple for students to use.

Specifications

Type Digital electronic weighing balance, economy model
Maximum capacity 300 g
Readability 0.01 g
Typical uses Small quantities of chemicals, seeds and small parts
Power supply, pan size and weighing units Confirm at enquiry

Density with Coins and Small Objects

A simple density investigation uses ten identical coins or metal washers. Weigh all ten together to reduce the reading error per item, measure their combined volume by displacement in a narrow measuring cylinder, and divide. Comparing the result with tabulated densities shows which metal or alloy the coins are mostly made of. Weighing ten together and dividing by ten is the same trick used to find the mass of a single sheet of paper or one grain of rice.

Applications

  • Weighing small quantities of chemicals for school solutions
  • Density investigations with coins, washers or small metal samples
  • Weighing seeds, leaves or small specimens in biology
  • Counting small identical parts by weighing a sample and then the whole batch

Care & Handling

  • Do not exceed 300 g; small economy balances are easily overloaded by heavy beakers or by pressing on the pan.
  • Use a weighing boat or paper for chemicals and keep powders off the pan of the digital weighing balance 300g and out of the gap around it.
  • If the balance runs on batteries, take them out before long storage to avoid leakage.
  • Calibrate with a known mass if readings drift, following the instructions for the model.

Why Choose LabEquip

Schools and small workshops that need a number of balances for simple weighing tasks, where fine steps matter more than capacity, choose economy models like this one. LabEquip lists it in its physics lab range. Ask about quantities via the contact page.

Frequently Asked Questions

Should I choose the 300 g, 0.01 g or the 600 g, 0.1 g economy balance?

Choose 300 g at 0.01 g when the things you weigh are light and small differences matter, such as a few grams of a chemical. Choose 600 g at 0.1 g for heavier objects, such as beakers of water, where a 0.1 g step is fine enough.

How do I weigh something lighter than the balance can show well?

Weigh many identical items together and divide by the number. Ten coins weighed together give the mass of one coin ten times more precisely than weighing it alone.

How does counting by weighing work?

Weigh a known number of identical parts, say twenty, to find the mass of one. Then weigh the whole batch and divide by the single-part mass. The method works when the parts are uniform in mass.

Why does the reading not return to exactly zero?

Small drifts come from temperature changes, residue on the pan or a draft. Press tare with the pan empty before each weighing, and clean the pan if the drift persists.

Can chemicals be weighed directly on the pan?

No. Always use a weighing boat, paper or small beaker and tare it first. Chemicals left on the pan corrode it and contaminate the next sample.

How do I check that the balance is reading correctly?

Weigh a known mass, such as a 100 g or 200 g weight, and compare the reading. If it is out, calibrate following the model’s instructions, using a mass of the value it asks for.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)