Quick Answer: The D tube holder for the Deflectron is the stand that supports the glass electron tube during experiments. This Deflectron tube holder keeps the fragile vacuum tube steady, at a fixed height and in line with the Helmholtz coils, so that beam deflection can be measured reliably.
What the Holder Does
Electron deflection tubes are evacuated glass bulbs with an electron gun, deflection plates and a fluorescent screen sealed inside. They cannot sit on the bench by themselves, and they must not be gripped in an ordinary retort clamp, which can crack the glass. A dedicated holder supports the tube at the points designed for it and leaves the screen in clear view.
Holders of this type normally also carry the electrical connections for the heater, the anode and the deflection plates, so the leads plug into the stand rather than directly into the tube, and they provide positions for the Helmholtz coils on either side. Which of these features this holder includes should be confirmed at enquiry.
Why Alignment Matters
In e/m and deflection experiments the beam’s path is read against a scale on the tube’s screen. If the tube is tilted relative to the coils, the magnetic field is no longer perpendicular to the beam and the path becomes a helix rather than a flat arc, so the measured radius is wrong. A holder that fixes the tube on the coil axis removes that source of error and lets the setup be rebuilt the same way each session.
A stable stand also allows the room to be darkened and readings taken without anyone steadying the tube by hand, which matters given the high accelerating voltages these tubes use.
Specifications
| Product | Tube holder (stand) for the Deflectron electron tube |
| Purpose | Holds the evacuated glass tube steady and aligned for beam measurements |
| Used with | Deflectron tube, Helmholtz coil pair, high-voltage and heater supplies |
| Experiments supported | Electron deflection in electric and magnetic fields, e/m determination |
| Connection sockets and coil mounting | Confirm at enquiry |
Uses in the Laboratory
- Mounting the Deflectron tube for magnetic deflection with Helmholtz coils
- Electric deflection experiments using the tube’s internal plates
- Repeatable e/m practicals in which the same setup is rebuilt each week
- Lecture demonstrations of beam deflection in a darkened room
Care & Handling
- Insert and remove the tube only with the power supplies switched off and the leads disconnected
- Handle the glass tube by its designated grip points, never by the screen bulb alone
- Keep the holder on a level, stable bench so the tube cannot be knocked over
- Store the tube in its padded box rather than leaving it in the holder between sessions
Why Choose LabEquip
Departments that buy the Deflectron electron tube need a proper stand for it, and often order the Helmholtz coils for the Deflectron at the same time. Contact LabEquip to match the holder to the tube and coils already in the lab.
Frequently Asked Questions
Why can’t the tube be held in an ordinary laboratory clamp?
A retort clamp presses on the glass at a point not designed to take the load and can crack the evacuated bulb. A dedicated holder supports the tube where it was designed to be supported and spreads the force safely.
Does the holder keep the tube aligned with the Helmholtz coils?
That is its main purpose. Keeping the beam at right angles to the coil field ensures the electrons follow a flat circular path, so the radius read from the screen corresponds to a single field value.
What happens if the tube is tilted in the field?
Part of the electron velocity then runs along the field, and the beam follows a helix instead of a circle. The trace on the screen shifts and the e/m result becomes unreliable.
Is the holder needed for electric deflection experiments too?
Yes. Even without coils, the tube must be held still and at a known orientation so that the beam’s displacement on the screen can be read against the scale.
How should the tube be fitted into the holder safely?
Switch off and disconnect all supplies, place the tube gently into its seat, secure it as the holder is designed to, and only then reconnect the leads. Reverse the order when removing it.
Which tube does this holder fit?
It is listed for the Deflectron tube. If the lab uses a different electron tube, confirm the fit at enquiry, because neck size and contact layout differ between tube systems.
Last Updated: October 2026










Reviews
There are no reviews yet.