Quick Answer: The Deflectron is an electron deflection tube: an evacuated glass tube in which an electron gun fires a narrow beam across a fluorescent screen, so the path shows up as a glowing line. Applying an electric field between deflection plates, or a magnetic field from coils outside the tube, bends the beam for studies of cathode rays and the forces on moving charges.
What the Glowing Trace Shows
Inside an electron deflection tube a heated cathode releases electrons, and the anode voltage accelerates them into a beam. The screen is set along the beam’s path and marked with a grid, so students see the whole trajectory rather than a single spot. With no field applied the trace is straight; this alone shows that the rays travel in straight lines.
A voltage across the two deflection plates produces a uniform electric field E between them. The electrons feel a constant sideways force eE while their forward speed stays the same, exactly like a ball thrown horizontally under gravity, so the trace curves into a parabola. The deflection is towards the positive plate, which is the classic evidence that the beam carries negative charge.
Magnetic Deflection and Crossed Fields
Coils placed on either side of the tube give a magnetic field across the beam. The force evB is always at right angles to the motion, so the trace bends into an arc of a circle instead of a parabola. Fleming’s left-hand rule predicts the direction once students remember that the conventional current points opposite to the electron flow.
Applying both fields at once allows them to be adjusted until the trace runs straight again. The electric and magnetic forces then balance, eE = evB, so the beam speed is v = E/B. Because the speed also comes from the accelerating voltage through eU = ½mv², the two results combine to give the specific charge e/m = E²/(2UB²).
Uses in the Laboratory
- Showing that cathode rays travel in straight lines and are deflected towards a positive plate
- Comparing the parabolic path in an electric field with the circular arc in a magnetic field
- Balancing crossed electric and magnetic fields to find the beam speed and estimate e/m
- Applying Fleming’s left-hand rule to a beam of negative charges
Specifications
| Type | Electron deflection tube for teaching |
| Beam display | Trace on a fluorescent screen with a grid, as usual for this kind of tube |
| Electric deflection | Field between internal deflection plates |
| Magnetic deflection | Field from coils placed outside the tube |
| Holder, coils and high-voltage supply | Confirm at enquiry |
Care & Handling
- Connect the tube only with every supply switched off and turned to zero, using shrouded leads, because the anode and plate voltages can give a dangerous shock.
- Do not exceed the voltages given in the tube’s own documentation; excessive voltage shortens its life.
- Treat the tube as an evacuated glass vessel: keep it in its holder and avoid knocks, which can make it implode.
- Reduce the beam brightness when the trace is not being studied, so the screen coating is not marked by a stationary spot.
Why Choose LabEquip
Schools and colleges teaching the discovery of the electron usually want a tube that shows the whole beam path rather than a spot on the end of the tube. LabEquip offers the Deflectron in its physics lab equipment range next to the apparatus for the specific charge of the electron. The contact page is the place to ask which holder, coils and supply the tube needs.
Frequently Asked Questions
What does a Deflectron show?
It shows the path of an electron beam as a glowing line on a fluorescent screen inside the tube. Students can watch the beam travel straight, bend into a parabola in an electric field and into a circular arc in a magnetic field.
Why is the path in the electric field a parabola?
Between parallel plates the electric force on each electron is constant and acts sideways, while the forward speed does not change. The sideways displacement therefore grows with the square of the time spent between the plates, just as a horizontally thrown ball falls under gravity.
How is e/m found with crossed fields?
The electric and magnetic fields are adjusted until the beam runs straight, so eE = evB and the speed is E/B. Putting that speed into eU = ½mv² gives e/m = E²/(2UB²), using the plate field, the coil field and the accelerating voltage.
Which way does the beam bend in a magnetic field?
Use Fleming’s left-hand rule with the current pointing opposite to the direction the electrons travel, because electrons carry negative charge. Reversing the coil current reverses the bend, which is a quick check that the rule has been applied correctly.
How is a deflection tube different from a fine-beam tube?
A deflection tube is evacuated and shows the beam on a screen over a short section of its path, with plates for electric deflection. A fine-beam tube contains low-pressure gas so the beam glows along its whole length and can be bent into a complete circle by a magnetic field.
What precautions are needed when using the tube?
Switch off and zero all supplies before touching any connection, use shrouded leads and stay within the tube’s stated voltages. Handle the glass with care, because an evacuated tube can implode if it is struck.
Last Updated: October 2026










Reviews
There are no reviews yet.