Search

In Stock

Cymbal Weights Set (Slotted Weights)

Precisely Machined Slotted Discs: Ensure uniform mass distribution for accurate loading and balance experiments.

Central Slot with Smooth Finish: Allows quick placement on hangers or rods while maintaining stable alignment.

₹600.00

Quick Answer: The Cymbal Weights Set is a set of slotted weights: flat, cymbal-shaped discs with a slot cut from the edge to the centre so that each disc can be slipped onto a weight hanger without unhooking it. Slotted weights are used wherever a load must be increased step by step, as in Hooke’s law and Young’s modulus experiments.

Why the Discs Are Slotted

In a loading experiment the hanger stays hooked to the spring, wire or string throughout, and masses are added or removed one at a time. A slot lets each disc slide sideways onto the hanger’s stem and drop onto the stack, so the system is never unloaded and re-hooked between readings. Stacking discs with their slots turned in alternate directions stops the pile from sliding off the stem when it swings.

The weight added by each disc is its mass multiplied by the gravitational field strength, W = mg. In loading and unloading sequences, students record the extension or reading after each addition and again after each removal; agreement between the two sets shows that the material has stayed within its elastic limit, while a gap reveals permanent stretch or friction in the apparatus.

Experiments That Use Them

  • Hooke’s law: extension of a spring against load
  • Young’s modulus of a wire with Searle’s apparatus
  • Tension in a sonometer wire for the laws of vibrating strings
  • Principle of moments on a metre rule or lever
  • Pulley systems, the force table and acceleration with a hanging mass

Specifications

Item Slotted (cymbal-type) weights set
Form Flat discs with a radial slot to fit a hanger stem
Use Adding loads in equal steps without unhooking
Pairs with Weight hanger, springs, Searle’s apparatus, sonometer, pulleys
Masses in the set, material and hanger included Confirm at enquiry

Getting Reliable Readings

Lower each disc gently rather than dropping it; a sudden load makes a spring bounce and overshoot the true extension, and with a wire it can briefly exceed the elastic limit. Wait for the system to settle before reading. Check that the stated masses of the discs are close to one another by weighing a few on a balance; for careful Young’s modulus work, using the same discs in the same order for loading and unloading keeps any small differences from mixing into the results.

Care & Handling

  • Keep the weights in their stand or box, sorted by size, so the set stays complete.
  • Do not let the discs fall onto hard floors; dents and chips change their mass.
  • Wipe metal discs clean and dry, and never use them as hammers or doorstops.
  • Check that the hanger stem is straight, so the slots slide on smoothly.

Why Choose LabEquip

Physics teachers need several sets so that each group can run its own loading experiment, and these are often ordered with springs and hangers. LabEquip lists the set among the mechanics lab equipment in its Physics Equipments category; for wire-stretching work, Searle’s Young’s modulus apparatus is the usual partner. Ask about the masses included through the contact page.

Frequently Asked Questions

Why are they called cymbal weights?

The name comes from their shape: flat, round discs with a slightly raised profile, like small cymbals. The slot cut to the centre is the practical feature, letting each one be added to a hanger without unhooking it.

Why turn the slots in alternate directions?

If all the slots line up, a swinging or tilted hanger can let the whole stack slide off sideways. Alternating the slots locks the discs onto the stem.

Are slotted weights accurate enough for Young’s modulus?

They are suitable for school and college work, where the extension is measured with a vernier or micrometer. For the most careful work, check the discs on a balance and use the measured masses in calculations.

What is the difference between mass and weight here?

Each disc has a mass in grams or kilograms. Its weight is the force with which gravity pulls it, equal to mass times the gravitational field strength, about 9.8 newtons per kilogram at the Earth’s surface. Experiments on springs and wires use the weight.

How do I avoid damaging a spring with slotted weights?

Add loads gradually and stop once the extension is no longer proportional to the load. Beyond the elastic limit the spring stays permanently stretched and gives wrong results in later experiments.

Do I need a separate hanger?

Slotted weights need a hanger with a stem and a hook or loop to hang from. Whether one comes with this set is part of the listing details, so check it when ordering if you do not already have hangers.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)