Search

In Stock

Cylindrical Magnet, Pair, Alnico

High-Coercivity Alnico Composition: Manufactured from a premium Aluminum-Nickel-Cobalt alloy (Al-Ni-Co) to ensure superior resistance to demagnetization and maintain constant flux density under high-frequency laboratory usage.

Precision-Ground Geometric Symmetry: Features standardized cylindrical dimensions with polished surfaces and color-coded polarities, supplied with soft-iron keepers to complete the magnetic circuit and preserve field integrity during long-term storage.

$3.89

Quick Answer: The Cylindrical Magnet, Pair, Alnico, is a matched pair of round-section bar magnets made of Alnico alloy, with a pole at each end. Cylindrical Alnico magnets are used in pairs for magnetometer practicals, for showing attraction and repulsion between poles, and for mapping the field of a bar magnet.

Why Magnets Are Supplied in Pairs

Many magnetism experiments need two similar magnets. The simplest is the demonstration that like poles repel and unlike poles attract, but the pair matters even more in quantitative work. In the sum and difference method with a vibration magnetometer, the two magnets are placed together first with like poles side by side and then with unlike poles side by side, and their periods compared. With a deflection magnetometer, the null method places one magnet on each arm.

Storage is another reason for pairs. Two bar magnets are kept side by side with opposite poles adjacent, and a soft iron keeper laid across each end. The magnets and keepers then form a closed loop for the field, which protects Alnico magnets from slowly losing their strength.

Specifications

Type Cylindrical bar magnets, supplied as a pair
Material Alnico
Poles One at each end, usually marked
Storage Side by side with opposite poles together and keepers across the ends
Length, diameter and keepers included Confirm at enquiry

Round Rods in Magnetometer Work

A cylindrical magnet has a circular cross-section rather than the rectangular section of a flat bar magnet. Its moment of inertia about an axis through its centre, needed for the period of oscillation, is calculated from its mass, length and radius: the mass times (length squared divided by twelve plus radius squared divided by four). Students must use this form rather than the rectangular-bar formula.

Because the poles of any bar magnet lie a little inside its ends, the effective magnetic length is shorter than the rod. Taking readings with the magnet reversed and averaging, as is standard practice, reduces the error this causes.

Practical Uses

  • Comparing magnetic moments with deflection and vibration magnetometers
  • Showing attraction and repulsion between like and unlike poles
  • Plotting the field around a single magnet and between two magnets
  • Locating neutral points with the magnet in different orientations

Care & Handling

  • Store the two magnets side by side with opposite poles together and keepers across the ends.
  • Never drop the magnets or let them slam together, which weakens Alnico.
  • Keep them away from steel furniture, electronic equipment and bank cards.
  • Check the marked north pole against a compass from time to time, since markings can wear.

Why Choose LabEquip

Colleges and schools buy matched cylindrical Alnico magnets for magnetometer practicals where two magnets of similar size are required. LabEquip lists them with its magnetometers and other magnets in the physics equipment category, and pairs for a whole practical class can be requested via the contact page.

Frequently Asked Questions

Why are cylindrical magnets sold as a pair?

Several magnetometer methods need two similar magnets, such as the sum and difference method and the null method. A pair also stores correctly, side by side with opposite poles together and keepers across the ends.

How should cylindrical Alnico magnets be stored?

Lay them side by side with the north pole of one next to the south pole of the other, and place a soft iron keeper across each end. This closed arrangement protects the magnetism during storage.

How is the moment of inertia of a cylindrical magnet calculated?

Multiply the mass by the sum of the square of the length divided by twelve and the square of the radius divided by four. Measure the length and diameter with vernier calipers and the mass on a balance.

Are cylindrical magnets different from rectangular bar magnets in use?

They behave the same magnetically, with a pole at each end. The differences are the formula for the moment of inertia and that round magnets can roll, so they should be kept in a tray or against a stop on the bench.

Why is the magnetic length shorter than the actual length?

The poles are not points at the very ends but regions slightly inside them. The distance between these regions, the magnetic length, is usually taken as somewhat less than the full length of the rod.

How can the poles be identified if the markings wear off?

Hang the magnet horizontally from a thread away from iron; the end that points north is the north-seeking pole. Alternatively, bring it near a compass and see which end attracts the south-seeking end of the needle.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)