Search

In Stock

Current Carrying Solenoid

Uniformly Wound Insulated Copper Coil: Ensures consistent magnetic field distribution along the solenoid length.

Rigid Non-Magnetic Former with Terminals: Maintains coil geometry and provides secure electrical connections for repeatable results.

₹2,450.00

Quick Answer: The Current Carrying Solenoid is a long, closely wound coil of insulated wire that produces a strong, nearly uniform magnetic field inside it when a current flows. Physics classes use the current carrying solenoid to study how the field depends on current and turns per unit length, and how it compares with a bar magnet.

A Uniform Field Inside

Each turn of the solenoid contributes a loop field, and in a long coil those fields reinforce each other inside and largely cancel outside. Well away from the ends, the field inside is almost uniform and parallel to the axis, with magnitude B = μ0nI, where n is the number of turns per metre and I the current. The field does not depend on the coil’s diameter, provided the solenoid is long compared with its width.

At each end the field falls to about half its central value, and outside the coil the lines spread out and return round the sides, giving the same pattern as a bar magnet. One end acts as a north pole and the other as a south pole, and reversing the current swaps them. These two results, uniform inside and dipole-like outside, are why solenoids are used in relays, door locks, MRI scanners and particle detectors.

Specifications

Apparatus Long coil of insulated wire (solenoid)
Field inside Nearly uniform and along the axis, B = μ0nI
Field outside Like a bar magnet, with poles at the ends
Supply Low-voltage DC through a rheostat and ammeter
Length, turns and maximum current Confirm at enquiry

Measuring the Field

The field along the axis can be explored with a small compass or magnetometer at the ends, with a calibrated Hall probe or magnetic field sensor pushed along the inside, or with a small search coil connected to a ballistic galvanometer when the current is switched. Plotting B against position shows the flat central region and the drop at the ends, and repeating at several currents confirms that B is proportional to I. Iron filings sprinkled on a card through the coil show the shape of the field outside.

Experiments

  • Plotting the magnetic field along the axis of the solenoid
  • Showing that the field at the centre is proportional to current
  • Comparing the external field with that of a bar magnet using iron filings or compasses
  • Magnetising a steel rod placed inside the coil with direct current
  • Introducing self-induction and the back emf when the current is switched off

Care & Handling

  • Do not exceed the solenoid’s current rating, and switch off between readings so the winding stays cool.
  • When switching off a large current, expect a small spark at the switch from self-induction; use a proper switch, not a loose lead.
  • Keep steel tools and magnets away while measuring, as they distort the field.
  • Store it with the winding protected from knocks that could damage the insulation.

Why Choose LabEquip

Senior secondary and college physics departments buy solenoids for the electromagnetism practicals that link Ampère’s law to measurement. This solenoid is listed in LabEquip’s Physics Equipments, and the coil for demonstrating the magnetic field suits introductory lessons. For winding details, write via our contact page.

Frequently Asked Questions

Why is the field inside a long solenoid uniform?

Inside the coil, the fields from all the turns point the same way along the axis, and away from the ends the contributions from turns on either side balance evenly. The result is a field that hardly changes across or along the central region.

Why is the field at the ends only half the central value?

At the end of a long solenoid all the turns lie on one side of the point, so it receives the contribution of only half of an effectively endless coil. The field there is therefore about half that at the centre.

Does the field depend on the diameter of the solenoid?

For a long solenoid, no. The field inside depends only on the turns per unit length and the current. The diameter matters only when the coil is short, because end effects then reach the centre.

How can I find which end is the north pole?

Look at the end of the coil: if the current flows anticlockwise, that end is a north pole. Alternatively, grip the coil with your right hand, fingers following the current, and your thumb points to the north end.

What happens if an iron rod is placed inside?

The iron becomes magnetised and greatly increases the magnetic flux, turning the solenoid into an electromagnet. A steel rod keeps much of its magnetism after the current stops, so this is a simple way to make a permanent magnet.

Why does a spark appear when the current is switched off?

The collapsing magnetic field induces an emf in the coil that tries to keep the current flowing. This back emf can be large enough to jump the opening switch contacts as a small spark, a demonstration of self-induction.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)